Do not reserve DMA pools on board file as this can be done via CMA.
The motivation for doing this is to allow to register the VPU driver via a
common
SoC file instead of per board.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
This applies against 20121115 linux-next.
Changes since v3:
- Remove all the DMA pools
Changes since v2:
- No changes. Newly introduced on this series
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 66 ++-------------------------
1 file changed, 3 insertions(+), 63 deletions(-)
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index b744226..914b2f8 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,7 +30,6 @@
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
-#include <linux/dma-mapping.h>
#include <linux/leds.h>
#include <linux/platform_data/asoc-mx27vis.h>
#include <media/soc_camera.h>
@@ -39,7 +38,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/system_info.h>
-#include <asm/memblock.h>
#include "common.h"
#include "devices-imx27.h"
@@ -234,14 +232,8 @@ static struct mx2_camera_platform_data visstrim_camera = {
.clk = 100000,
};
-static phys_addr_t mx2_camera_base __initdata;
-#define MX2_CAMERA_BUF_SIZE SZ_8M
-
static void __init visstrim_camera_init(void)
{
- struct platform_device *pdev;
- int dma;
-
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
@@ -249,23 +241,7 @@ static void __init visstrim_camera_init(void)
gpio_set_value(TVP5150_RSTN, 1);
ndelay(200000);
- pdev = imx27_add_mx2_camera(&visstrim_camera);
- if (IS_ERR(pdev))
- return;
-
- dma = dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base, mx2_camera_base,
- MX2_CAMERA_BUF_SIZE,
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
- if (!(dma & DMA_MEMORY_MAP))
- return;
-}
-
-static void __init visstrim_reserve(void)
-{
- /* reserve 4 MiB for mx2-camera */
- mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE);
+ imx27_add_mx2_camera(&visstrim_camera);
}
/* GPIOs used as events for applications */
@@ -434,47 +410,12 @@ static const struct imx_ssi_platform_data
visstrim_m10_ssi_pdata __initconst = {
.flags = IMX_SSI_DMA | IMX_SSI_SYN,
};
-/* coda */
-
-static void __init visstrim_coda_init(void)
-{
- struct platform_device *pdev;
- int dma;
-
- pdev = imx27_add_coda();
- dma = dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base + MX2_CAMERA_BUF_SIZE,
- mx2_camera_base + MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE,
- DMA_MEMORY_MAP |
DMA_MEMORY_EXCLUSIVE);
- if (!(dma & DMA_MEMORY_MAP))
- return;
-}
-
/* DMA deinterlace */
static struct platform_device visstrim_deinterlace = {
.name = "m2m-deinterlace",
.id = 0,
};
-static void __init visstrim_deinterlace_init(void)
-{
- int ret = -ENOMEM;
- struct platform_device *pdev = &visstrim_deinterlace;
- int dma;
-
- ret = platform_device_register(pdev);
-
- dma = dma_declare_coherent_memory(&pdev->dev,
- mx2_camera_base + 2 *
MX2_CAMERA_BUF_SIZE,
- mx2_camera_base + 2 *
MX2_CAMERA_BUF_SIZE,
- MX2_CAMERA_BUF_SIZE,
- DMA_MEMORY_MAP |
DMA_MEMORY_EXCLUSIVE);
- if (!(dma & DMA_MEMORY_MAP))
- return;
-}
-
-
/* Audio */
static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
.amp_gain0_gpio = AMP_GAIN_0,
@@ -546,9 +487,9 @@ static void __init visstrim_m10_board_init(void)
platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
&iclink_tvp5150, sizeof(iclink_tvp5150));
gpio_led_register_device(0, &visstrim_m10_led_data);
- visstrim_deinterlace_init();
+ platform_device_register(&visstrim_deinterlace);
visstrim_camera_init();
- visstrim_coda_init();
+ imx27_add_coda();
}
static void __init visstrim_m10_timer_init(void)
@@ -562,7 +503,6 @@ static struct sys_timer visstrim_m10_timer = {
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
.atag_offset = 0x100,
- .reserve = visstrim_reserve,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
