Hello,

Just installed a ZIP drive, and got the following error when booting the kernel:

Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC28400R, ATA DISK drive
hdc: IOMEGA ZIP 100 ATAPI Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(33)
hdc: 98288kB, 196576 blocks, 512 sector size,  
hdc: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
ide-floppy: hdc: I/O error, pc = 5a, key =  5, asc = 24, ascq =  0

This annoying error appears each time I try to mount ZIP drive or eject it.
Despite this error, the drive works fine...

--
Alexander Sokolov
System Administrator
Netlink Co. Ltd.
Moscow, Russia



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to