On Thu, 2012-11-29 at 14:54 -0700, Lance Ortiz wrote:
> This header file will define a new trace event that will be triggered when
> a AER event occurs. The following data will be provided to the trace
> event.
>
> char * name - String containing the device path
>
> u32 status - Either the correctable or uncorrectable register
> indicating what error or errors have been see.
>
> u8 severity - error severity 0:NONFATAL 1:FATAL 2:CORRECTED
>
> The trace event will also provide a trace string that may look like:
>
> "0000:05:00.0 PCIe Bus Error:severity=Uncorrected (Non-Fatal), Poisoned
> TLP"
>
> Signed-off-by: Lance Ortiz <[email protected]>
> ---
>
> include/ras/aer_event.h | 77
> +++++++++++++++++++++++++++++++++++++++++++++++
Is there a reason this header is here? Egad, I never noticed the
ras_event.h that is there. This include/ras directory was created for
the sole purpose of trace events! This is not the way to do this.
Please look at the sample in samples/trace_events/
The proper way is to keep the header by the driver. Then you can simply
include the header with "aer_event.h".
But to have the macro magic work, you need to modify the Makefile to
have something like:
CFLAGS_aerdrv_errprint.o = -I$(src)
and it will be able to find your headers without a problem.
The ras_event.h needs to be fixed too. I may just send a patch myself.
-- Steve
> 1 files changed, 77 insertions(+), 0 deletions(-)
> create mode 100644 include/ras/aer_event.h
>
> diff --git a/include/ras/aer_event.h b/include/ras/aer_event.h
> new file mode 100644
> index 0000000..735c973
> --- /dev/null
> +++ b/include/ras/aer_event.h
> @@ -0,0 +1,77 @@
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM aer
> +#define TRACE_INCLUDE_FILE aer_event
> +
> +#if !defined(_TRACE_AER_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_AER_H
> +
> +#include <linux/tracepoint.h>
> +#include <linux/edac.h>
> +
> +
> +/*
> + * Anhance Error Reporting (AER) PCIE Report Error
> + *
> + * These events are generated when hardware detects a corrected or
> + * uncorrected event on a pci express device and reports
> + * errors. The event reports the following data.
> + *
> + * char * dev_name - String containing the device identification
> + * u32 status - Either the correctable or uncorrectable register
> + * indicating what error or errors have been seen
> + * u8 severity - error severity 0:NONFATAL 1:FATAL 2:CORRECTED
> + */
> +
> +#define correctable_error_string \
> + {BIT(0), "Receiver Error"}, \
> + {BIT(6), "Bad TLP"}, \
> + {BIT(7), "Bad DLLP"}, \
> + {BIT(8), "RELAY_NUM Rollover"}, \
> + {BIT(12), "Replay Timer Timeout"}, \
> + {BIT(13), "Advisory Non-Fatal"}
> +
> +#define uncorrectable_error_string \
> + {BIT(4), "Data Link Protocol"}, \
> + {BIT(12), "Poisoned TLP"}, \
> + {BIT(13), "Flow Control Protocol"}, \
> + {BIT(14), "Completion Timeout"}, \
> + {BIT(15), "Completer Abort"}, \
> + {BIT(16), "Unexpected Completion"}, \
> + {BIT(17), "Receiver Overflow"}, \
> + {BIT(18), "Malformed TLP"}, \
> + {BIT(19), "ECRC"}, \
> + {BIT(20), "Unsupported Request"}
> +
> +TRACE_EVENT(aer_event,
> + TP_PROTO(const char *dev_name,
> + const u32 status,
> + const u8 severity),
> +
> + TP_ARGS(dev_name, status, severity),
> +
> + TP_STRUCT__entry(
> + __string( dev_name, dev_name )
> + __field( u32, status )
> + __field( u8, severity )
> + ),
> +
> + TP_fast_assign(
> + __assign_str(dev_name, dev_name);
> + __entry->status = status;
> + __entry->severity = severity;
> + ),
> +
> + TP_printk("%s PCIe Bus Error: severity=%s, %s\n",
> + __get_str(dev_name),
> + (__entry->severity == HW_EVENT_ERR_CORRECTED) ? "Corrected" :
> + ((__entry->severity == HW_EVENT_ERR_FATAL) ?
> + "Fatal" : "Uncorrected"),
> + __entry->severity == HW_EVENT_ERR_CORRECTED ?
> + __print_flags(__entry->status, "|", correctable_error_string) :
> + __print_flags(__entry->status, "|", uncorrectable_error_string))
> +);
> +
> +#endif /* _TRACE_AER_H */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
