Hi Abhilash Kesavan.
I compiled in 3.7-rc8
I got a compile error & warning.
Compile error.
CC drivers/devfreq/exynos5_ppmu.o
drivers/devfreq/exynos5_ppmu.c:56:14: error: 'S5P_VA_PPMU_DDR_C' undeclared
here (not in a function)
drivers/devfreq/exynos5_ppmu.c:59:14: error: 'S5P_VA_PPMU_DDR_R1' undeclared
here (not in a function)
drivers/devfreq/exynos5_ppmu.c:62:13: error: 'S5P_VA_PPMU_DDR_L' undeclared
here (not in a function)
drivers/devfreq/exynos5_ppmu.c:65:13: error: 'S5P_VA_PPMU_RIGHT' undeclared
here (not in a function)
drivers/devfreq/exynos5_ppmu.c:68:14: error: 'S5P_VA_PPMU_CPU' undeclared
here (not in a function)
make[2]: *** [drivers/devfreq/exynos5_ppmu.o] Error 1
> + data->devfreq = devfreq_add_device(dev,
> &exynos5_devfreq_int_profile,
> + "simple_ondemand",
> + &exynos5_int_ondemand_data);
drivers/devfreq/exynos5_bus.c: In function 'exynos5_busfreq_int_probe':
drivers/devfreq/exynos5_bus.c:388:9: warning: passing argument 3 of
'devfreq_add_device' from incompatible pointer type [enabled by default]
include/linux/devfreq.h:170:24: note: expected 'struct devfreq_governor
const *' but argument is of type 'char *'
include/linux/devfreq.h
extern struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const struct devfreq_governor *governor,
void *data);
Need change?
> +
> + if (IS_ERR(data->devfreq)) {
> + err = PTR_ERR(data->devfreq);
> + goto err_devfreq_add;
> + }
> +static int exynos5_busfreq_int_target(struct device *dev, unsigned long
> *_freq,
> + u32 flags)
> +{
> + int err = 0;
> + struct platform_device *pdev = container_of(dev, struct
> platform_device,
...
> +
> + err = clk_set_rate(data->int_clk, freq * 1000);
How to change the INT clock? I think you have to change
arch/arm/mach-exynos/clock-exynos5250.c
(If you want to control via clock framework.)
Like this.
static struct clk exynos5_int_clk = {
.name = "int_clk",
.id = -1,
};
static struct clk_ops exynos5_clk_int_ops = {
.get_rate = exynos5_clk_int_get_rate,
.set_rate = exynos5_clk_int_set_rate
};
exynos5_int_clk.ops = &exynos5_clk_int_ops;
> +
> + if (err)
> + goto out;
> +
Thanks~
Best Regards.
> -----Original Message-----
> From: Abhilash Kesavan [mailto:a.kesa...@samsung.com]
> Sent: Friday, November 30, 2012 5:43 PM
> To: myungjoo....@samsung.com; kyungmin.p...@samsung.com; r...@sisk.pl;
> linux-kernel@vger.kernel.org; linux...@vger.kernel.org
> Cc: kgene....@samsung.com; jhbird.c...@samsung.com
> Subject: [PATCH RFC] PM/Devfreq: Add Exynos5-bus devfreq driver for
> Exynos5250.
>
> Exynos5-bus device devfreq driver monitors PPMU counters and
> adjusts operating frequencies and voltages with OPP. ASV should
> be used to provide appropriate voltages as per the speed group
> of the SoC rather than using a constant 1.025V.
>
> Signed-off-by: Abhilash Kesavan <a.kesa...@samsung.com>
> Cc: Jonghwan Choi <jhbird.c...@samsung.com>
> Cc: Kukjin Kim <kgene....@samsung.com>
> ---
> This code is based on Jonghwan Choi's <jhbird.c...@samsung.com> devfreq
> work
> for Exynos5250. This requires corresponding machine specific changes which
> will be posted once the driver is reviewed.
>
> drivers/devfreq/Kconfig | 10 +
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/exynos5_bus.c | 595
> ++++++++++++++++++++++++++++++++++++++++
> drivers/devfreq/exynos5_ppmu.c | 395 ++++++++++++++++++++++++++
> drivers/devfreq/exynos5_ppmu.h | 26 ++
> drivers/devfreq/exynos_ppmu.c | 56 ++++
> drivers/devfreq/exynos_ppmu.h | 79 ++++++
> 7 files changed, 1162 insertions(+), 0 deletions(-)
> create mode 100644 drivers/devfreq/exynos5_bus.c
> create mode 100644 drivers/devfreq/exynos5_ppmu.c
> create mode 100644 drivers/devfreq/exynos5_ppmu.h
> create mode 100644 drivers/devfreq/exynos_ppmu.c
> create mode 100644 drivers/devfreq/exynos_ppmu.h
>
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index 0f079be..1560d0d 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -78,4 +78,14 @@ config ARM_EXYNOS4_BUS_DEVFREQ
> To operate with optimal voltages, ASV support is required
> (CONFIG_EXYNOS_ASV).
>
> +config ARM_EXYNOS5_BUS_DEVFREQ
> + bool "ARM Exynos5250 Bus DEVFREQ Driver"
> + depends on SOC_EXYNOS5250
> + select ARCH_HAS_OPP
> + select DEVFREQ_GOV_SIMPLE_ONDEMAND
> + help
> + This adds the DEVFREQ driver for Exynos5250 bus interface
> (vdd_int).
> + It reads PPMU counters of memory controllers and adjusts the
> + operating frequencies and voltages with OPP support.
> +
> endif # PM_DEVFREQ
> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> index 8c46423..6259aa4 100644
> --- a/drivers/devfreq/Makefile
> +++ b/drivers/devfreq/Makefile
> @@ -6,3 +6,4 @@ obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) +=
> governor_userspace.o
>
> # DEVFREQ Drivers
> obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o
> +obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o
exynos5_ppmu.o
> exynos5_bus.o
> diff --git a/drivers/devfreq/exynos5_bus.c b/drivers/devfreq/exynos5_bus.c
> new file mode 100644
> index 0000000..8ced376
> --- /dev/null
> +++ b/drivers/devfreq/exynos5_bus.c
> @@ -0,0 +1,595 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework
> + * Based on work done by Jonghwan Choi <jhbird.c...@samsung.com>
> + * Support for only EXYNOS5250 is present.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/opp.h>
> +#include <linux/clk.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include "exynos_ppmu.h"
> +#include "exynos5_ppmu.h"
> +#include "governor.h"
> +
> +#define MAX_SAFEVOLT 1100000 /* 1.10V */
> +/* Assume that the bus is saturated if the utilization is 25% */
> +#define INT_BUS_SATURATION_RATIO 25
> +#define EXYNOS5_BUS_INT_POLL_TIME msecs_to_jiffies(100)
> +
> +enum int_level_idx {
> + LV_0,
> + LV_1,
> + LV_2,
> + LV_3,
> + LV_4,
> + _LV_END
> +};
> +
> +struct busfreq_data_int {
> + struct device *dev;
> + struct devfreq *devfreq;
> + bool disabled;
> + struct regulator *vdd_int;
> + unsigned long curr_freq;
> + unsigned long curr_volt;
> + unsigned long suspend_freq;
> + struct mutex lock;
> + struct clk *int_clk;
> + struct exynos5_ppmu_handle *ppmu;
> + struct delayed_work work;
> + int busy;
> +};
> +
> +struct exynos5_bus_int_handle {
> + struct list_head node;
> + struct delayed_work work;
> + bool boost;
> + bool poll;
> + unsigned long min;
> +};
> +
> +struct int_bus_opp_table {
> + unsigned int idx;
> + unsigned long clk;
> + unsigned long volt;
> +};
> +
> +static struct int_bus_opp_table exynos5_int_opp_table[] = {
> + {LV_0, 266000, 1025000},
> + {LV_1, 200000, 1025000},
> + {LV_2, 160000, 1025000},
> + {LV_3, 133000, 1025000},
> + {LV_4, 100000, 1025000},
> + {0, 0, 0},
> +};
> +
> +static struct busfreq_data_int *exynos5_bus_int_data;
> +static DEFINE_MUTEX(exynos5_bus_int_data_lock);
> +static LIST_HEAD(exynos5_bus_int_requests);
> +static DEFINE_MUTEX(exynos5_bus_int_requests_lock);
> +
> +static int exynos5_int_setvolt(struct busfreq_data_int *data,
> + unsigned long volt)
> +{
> + return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT);
> +}
> +
> +static int exynos5_busfreq_int_target(struct device *dev, unsigned long
> *_freq,
> + u32 flags)
> +{
> + int err = 0;
> + struct platform_device *pdev = container_of(dev, struct
> platform_device,
...
> +
> + err = clk_set_rate(data->int_clk, freq * 1000);
> +
> + if (err)
> + goto out;
> +
> + if (old_freq > freq)
> + err = exynos5_int_setvolt(data, volt);
> + if (err)
> + goto out;
> +
> + data->curr_freq = freq;
> +out:
> + mutex_unlock(&data->lock);
> + return err;
> +}
> +
> +static int exynos5_int_get_dev_status(struct device *dev,
> + struct devfreq_dev_status *stat)
> +{
> + struct platform_device *pdev = container_of(dev, struct
> platform_device,
> + dev);
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + stat->current_frequency = data->curr_freq;
> + stat->busy_time = data->busy;
> + stat->total_time = 100;
> +
> + return 0;
> +}
> +
> +static void exynos5_int_poll_start(struct busfreq_data_int *data)
> +{
> + struct exynos5_bus_int_handle *handle;
> +
> + mutex_lock(&exynos5_bus_int_requests_lock);
> + list_for_each_entry(handle, &exynos5_bus_int_requests, node) {
> + if (handle->poll) {
> + schedule_delayed_work(&data->work,
> + EXYNOS5_BUS_INT_POLL_TIME);
> + break;
> + }
> + }
> + mutex_unlock(&exynos5_bus_int_requests_lock);
> +}
> +
> +static void exynos5_int_poll_stop(struct busfreq_data_int *data)
> +{
> + cancel_delayed_work_sync(&data->work);
> +}
> +
> +static void exynos5_int_update(struct busfreq_data_int *data)
> +{
> + struct exynos5_bus_int_handle *handle;
> + int ret = 0;
> + bool poll = false;
> +
> + mutex_lock(&exynos5_bus_int_requests_lock);
> + list_for_each_entry(handle, &exynos5_bus_int_requests, node) {
> + if (handle->poll) {
> + poll = true;
> + break;
> + }
> + }
> + mutex_unlock(&exynos5_bus_int_requests_lock);
> +
> + ret = exynos5_ppmu_get_busy(data->ppmu, PPMU_SET_RIGHT);
> + if (ret >= 0 && poll)
> + data->busy = ret;
> + else
> + data->busy = 0;
> +
> + if (ret >= 0 || !poll) {
> + mutex_lock(&data->devfreq->lock);
> + update_devfreq(data->devfreq);
> + mutex_unlock(&data->devfreq->lock);
> + }
> +}
> +
> +static void exynos5_int_poll_work(struct work_struct *work)
> +{
> + struct delayed_work *dwork;
> + struct busfreq_data_int *data;
> +
> + dwork = to_delayed_work(work);
> + data = container_of(dwork, struct busfreq_data_int, work);
> +
> + exynos5_int_update(data);
> + exynos5_int_poll_start(data);
> +}
> +
> +static void exynos5_int_cancel_boost(struct work_struct *work)
> +{
> + struct delayed_work *dwork = to_delayed_work(work);
> + struct exynos5_bus_int_handle *handle;
> +
> + handle = container_of(dwork, struct exynos5_bus_int_handle, work);
> + handle->boost = false;
> +}
> +
> +struct exynos5_bus_int_handle *exynos5_bus_int_get(unsigned long
min_freq,
> + bool poll)
> +{
> + struct exynos5_bus_int_handle *handle;
> +
> + handle = kzalloc(sizeof(*handle), GFP_KERNEL);
> + if (!handle)
> + return NULL;
> +
> + handle->min = min_freq;
> + /* If polling, boost the frequency for the first poll cycle */
> + handle->boost = poll;
> + handle->poll = poll;
> + INIT_DELAYED_WORK(&handle->work, exynos5_int_cancel_boost);
> +
> + mutex_lock(&exynos5_bus_int_requests_lock);
> + list_add_tail(&handle->node, &exynos5_bus_int_requests);
> + mutex_unlock(&exynos5_bus_int_requests_lock);
> +
> + mutex_lock(&exynos5_bus_int_data_lock);
> +
> + if (exynos5_bus_int_data) {
> + cancel_delayed_work_sync(&exynos5_bus_int_data->work);
> + exynos5_int_update(exynos5_bus_int_data);
> + exynos5_int_poll_start(exynos5_bus_int_data);
> + }
> +
> + mutex_unlock(&exynos5_bus_int_data_lock);
> +
> + if (handle->boost)
> + schedule_delayed_work(&handle->work,
> EXYNOS5_BUS_INT_POLL_TIME);
> +
> + return handle;
> +}
> +
> +static void exynos5_int_exit(struct device *dev)
> +{
> + struct platform_device *pdev = container_of(dev, struct
> platform_device,
> + dev);
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + devfreq_unregister_opp_notifier(dev, data->devfreq);
> +}
> +
> +static struct devfreq_dev_profile exynos5_devfreq_int_profile = {
> + .initial_freq = 160000,
> + .polling_ms = 0,
> + .target = exynos5_busfreq_int_target,
> + .get_dev_status = exynos5_int_get_dev_status,
> + .exit = exynos5_int_exit,
> +};
> +
> +static int exynos5250_init_int_tables(struct busfreq_data_int *data)
> +{
> + int i, err = 0;
> +
> + for (i = LV_0; i < _LV_END; i++) {
> + err = opp_add(data->dev, exynos5_int_opp_table[i].clk,
> + exynos5_int_opp_table[i].volt);
> + if (err) {
> + dev_err(data->dev, "Cannot add opp entries.\n");
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +static struct devfreq_simple_ondemand_data exynos5_int_ondemand_data = {
> + .downdifferential = 2,
> + .upthreshold = INT_BUS_SATURATION_RATIO,
> +};
> +
> +static __devinit int exynos5_busfreq_int_probe(struct platform_device
> *pdev)
> +{
> + struct busfreq_data_int *data;
> + struct opp *opp;
> + struct device *dev = &pdev->dev;
> + unsigned long initial_freq;
> + unsigned long initial_volt;
> + int err = 0;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int),
> + GFP_KERNEL);
> + if (data == NULL) {
> + dev_err(dev, "Cannot allocate memory.\n");
> + return -ENOMEM;
> + }
> +
> + data->dev = dev;
> + mutex_init(&data->lock);
> +
> + err = exynos5250_init_int_tables(data);
> + if (err)
> + goto err_regulator;
> +
> + data->vdd_int = regulator_get(dev, "vdd_int");
> + if (IS_ERR(data->vdd_int)) {
> + dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
> + err = PTR_ERR(data->vdd_int);
> + goto err_regulator;
> + }
> +
> + data->int_clk = clk_get(dev, "int_clk");
> + if (IS_ERR(data->int_clk)) {
> + dev_err(dev, "Cannot get clock \"int_clk\"\n");
> + err = PTR_ERR(data->int_clk);
> + goto err_clock;
> + }
> +
> + rcu_read_lock();
> + opp = opp_find_freq_floor(dev,
> + &exynos5_devfreq_int_profile.initial_freq);
> + if (IS_ERR(opp)) {
> + rcu_read_unlock();
> + dev_err(dev, "Invalid initial frequency %lu kHz.\n",
> + exynos5_devfreq_int_profile.initial_freq);
> + err = PTR_ERR(opp);
> + goto err_opp_add;
> + }
> + initial_freq = opp_get_freq(opp);
> + initial_volt = opp_get_voltage(opp);
> + rcu_read_unlock();
> + data->curr_freq = initial_freq;
> + data->curr_volt = initial_volt;
> +
> + err = clk_set_rate(data->int_clk, initial_freq * 1000);
> + if (err) {
> + dev_err(dev, "Failed to set initial frequency\n");
> + goto err_opp_add;
> + }
> +
> + err = exynos5_int_setvolt(data, initial_volt);
> + if (err)
> + goto err_opp_add;
> +
> + platform_set_drvdata(pdev, data);
> +
> + data->ppmu = exynos5_ppmu_get();
> + if (!data->ppmu)
> + goto err_ppmu_get;
> +
> + INIT_DELAYED_WORK(&data->work, exynos5_int_poll_work);
> +
> + data->devfreq = devfreq_add_device(dev,
> &exynos5_devfreq_int_profile,
> + "simple_ondemand",
> + &exynos5_int_ondemand_data);
> +
> + if (IS_ERR(data->devfreq)) {
> + err = PTR_ERR(data->devfreq);
> + goto err_devfreq_add;
> + }
> +
> + devfreq_register_opp_notifier(dev, data->devfreq);
> +
> + mutex_lock(&exynos5_bus_int_data_lock);
> + exynos5_bus_int_data = data;
> + mutex_unlock(&exynos5_bus_int_data_lock);
> +
> + exynos5_int_update(data);
> + exynos5_int_poll_start(data);
> +
> + return 0;
> +
> +err_devfreq_add:
> + devfreq_remove_device(data->devfreq);
> +err_ppmu_get:
> + platform_set_drvdata(pdev, NULL);
> +err_opp_add:
> + clk_put(data->int_clk);
> +err_clock:
> + regulator_put(data->vdd_int);
> +err_regulator:
> + return err;
> +}
> +
> +static __devexit int exynos5_busfreq_int_remove(struct platform_device
> *pdev)
> +{
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + mutex_lock(&exynos5_bus_int_data_lock);
> + exynos5_bus_int_data = NULL;
> + mutex_unlock(&exynos5_bus_int_data_lock);
> +
> + devfreq_remove_device(data->devfreq);
> + exynos5_int_poll_stop(data);
> + regulator_put(data->vdd_int);
> + clk_put(data->int_clk);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int exynos5_busfreq_int_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct opp *max_opp;
> + struct opp *opp;
> + unsigned long maxfreq = ULONG_MAX;
> + unsigned long volt;
> + unsigned long freq;
> + int err = 0;
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + exynos5_int_poll_stop(data);
> + /*
> + * Set the frequency to the maximum enabled frequency, but set the
> + * voltage to the maximum possible voltage in case the bootloader
> + * sets the frequency to maximum during resume.
> + */
> + mutex_lock(&data->lock);
> +
> + data->disabled = true;
> +
> + rcu_read_lock();
> + max_opp = opp_find_freq_floor(data->dev, &maxfreq);
> + if (IS_ERR(max_opp)) {
> + rcu_read_unlock();
> + err = PTR_ERR(max_opp);
> + goto unlock;
> + }
> +
> + maxfreq = ULONG_MAX;
> + if (data->devfreq->max_freq)
> + maxfreq = data->devfreq->max_freq;
> +
> + opp = opp_find_freq_floor(data->dev, &maxfreq);
> + if (IS_ERR(opp)) {
> + rcu_read_unlock();
> + err = PTR_ERR(opp);
> + goto unlock;
> + }
> +
> + freq = opp_get_freq(opp);
> + volt = opp_get_voltage(max_opp);
> + rcu_read_unlock();
> +
> + err = exynos5_int_setvolt(data, volt);
> + if (err)
> + goto unlock;
> +
> + err = clk_set_rate(data->int_clk, freq * 1000);
> + if (err)
> + goto unlock;
> +
> + data->suspend_freq = freq;
> +
> +unlock:
> + mutex_unlock(&data->lock);
> + return err;
> +}
> +
> +static int exynos5_busfreq_int_resume_noirq(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + int err = 0;
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + /*
> + * Set the frequency to the maximum enabled frequency in case the
> + * bootloader raised it during resume.
> + */
> + mutex_lock(&data->lock);
> +
> + err = clk_set_rate(data->int_clk, data->suspend_freq * 1000);
> + if (err)
> + goto unlock;
> +
> +unlock:
> + mutex_unlock(&data->lock);
> + return err;
> +}
> +
> +static int exynos5_busfreq_int_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> + int err = 0;
> +
> + /* Restore the frequency and voltage to the values pre-suspend */
> + mutex_lock(&data->lock);
> +
> + data->disabled = false;
> +
> + err = clk_set_rate(data->int_clk, data->curr_freq * 1000);
> + if (err)
> + goto unlock;
> +
> + err = exynos5_int_setvolt(data, data->curr_volt);
> + if (err)
> + goto unlock;
> +
> +unlock:
> + mutex_unlock(&data->lock);
> +
> + if (!err)
> + exynos5_int_poll_start(data);
> +
> + return err;
> +}
> +#endif
> +
> +static const struct dev_pm_ops exynos5_busfreq_int_pm = {
> + .suspend = exynos5_busfreq_int_suspend,
> + .resume_noirq = exynos5_busfreq_int_resume_noirq,
> + .resume = exynos5_busfreq_int_resume,
> +};
> +
> +/* platform device pointer for exynos5 devfreq device. */
> +static struct platform_device *exynos5_devfreq_pdev;
> +
> +static struct platform_driver exynos5_busfreq_int_driver = {
> + .probe = exynos5_busfreq_int_probe,
> + .remove = __devexit_p(exynos5_busfreq_int_remove),
> + .driver = {
> + .name = "exynos5-bus-int",
> + .owner = THIS_MODULE,
> + .pm = &exynos5_busfreq_int_pm,
> + },
> +};
> +
> +static int __init exynos5_busfreq_int_init(void)
> +{
> + int ret;
> +
> + ret = platform_driver_register(&exynos5_busfreq_int_driver);
> + if (ret < 0)
> + goto out;
> +
> + exynos5_devfreq_pdev =
> + platform_device_register_simple("exynos5-bus-int", -1, NULL,
> 0);
> + if (IS_ERR_OR_NULL(exynos5_devfreq_pdev)) {
> + ret = PTR_ERR(exynos5_devfreq_pdev);
> + goto out1;
> + }
> +
> + return 0;
> +out1:
> + platform_driver_unregister(&exynos5_busfreq_int_driver);
> +out:
> + return ret;
> +}
> +late_initcall(exynos5_busfreq_int_init);
> +
> +static void __exit exynos5_busfreq_int_exit(void)
> +{
> + platform_device_unregister(exynos5_devfreq_pdev);
> + platform_driver_unregister(&exynos5_busfreq_int_driver);
> +}
> +module_exit(exynos5_busfreq_int_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework");
> diff --git a/drivers/devfreq/exynos5_ppmu.c
> b/drivers/devfreq/exynos5_ppmu.c
> new file mode 100644
> index 0000000..9752098
> --- /dev/null
> +++ b/drivers/devfreq/exynos5_ppmu.c
> @@ -0,0 +1,395 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS5 PPMU support
> + * Support for only EXYNOS5250 is present.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/debugfs.h>
> +#include <linux/hrtimer.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +
> +#include <mach/map.h>
> +
> +#include "exynos_ppmu.h"
> +#include "exynos5_ppmu.h"
> +
> +#define FIXED_POINT_OFFSET 8
> +#define FIXED_POINT_MASK ((1 << FIXED_POINT_OFFSET) - 1)
> +
> +enum exynos5_ppmu_list {
> + PPMU_DDR_C,
> + PPMU_DDR_R1,
> + PPMU_DDR_L,
> + PPMU_RIGHT,
> + PPMU_CPU,
> + PPMU_END,
> +};
> +
> +struct exynos5_ppmu_handle {
> + struct list_head node;
> + struct exynos_ppmu ppmu[PPMU_END];
> +};
> +
> +static DEFINE_SPINLOCK(exynos5_ppmu_lock);
> +static LIST_HEAD(exynos5_ppmu_handle_list);
> +static struct exynos5_ppmu_handle *exynos5_ppmu_trace_handle;
> +
> +static const char *exynos5_ppmu_name[PPMU_END] = {
> + [PPMU_DDR_C] = "DDR_C",
> + [PPMU_DDR_R1] = "DDR_R1",
> + [PPMU_DDR_L] = "DDR_L",
> + [PPMU_RIGHT] = "RIGHT",
> + [PPMU_CPU] = "CPU",
> +};
> +
> +static struct exynos_ppmu ppmu[PPMU_END] = {
> + [PPMU_DDR_C] = {
> + .hw_base = S5P_VA_PPMU_DDR_C,
> + },
> + [PPMU_DDR_R1] = {
> + .hw_base = S5P_VA_PPMU_DDR_R1,
> + },
> + [PPMU_DDR_L] = {
> + .hw_base = S5P_VA_PPMU_DDR_L,
> + },
> + [PPMU_RIGHT] = {
> + .hw_base = S5P_VA_PPMU_RIGHT,
> + },
> + [PPMU_CPU] = {
> + .hw_base = S5P_VA_PPMU_CPU,
> + },
> +};
> +
> +static void exynos5_ppmu_reset(struct exynos_ppmu *ppmu)
> +{
> + unsigned long flags;
> +
> + void __iomem *ppmu_base = ppmu->hw_base;
> +
> + /* Reset PPMU */
> + exynos_ppmu_reset(ppmu_base);
> +
> + /* Set PPMU Event */
> + ppmu->event[PPMU_PMNCNT0] = RD_DATA_COUNT;
> + exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT0,
> + ppmu->event[PPMU_PMNCNT0]);
> + ppmu->event[PPMU_PMCCNT1] = WR_DATA_COUNT;
> + exynos_ppmu_setevent(ppmu_base, PPMU_PMCCNT1,
> + ppmu->event[PPMU_PMCCNT1]);
> + ppmu->event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
> + exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
> + ppmu->event[PPMU_PMNCNT3]);
> +
> + local_irq_save(flags);
> + ppmu->reset_time = ktime_get();
> + /* Start PPMU */
> + exynos_ppmu_start(ppmu_base);
> + local_irq_restore(flags);
> +}
> +
> +static void exynos5_ppmu_read(struct exynos_ppmu *ppmu)
> +{
> + int j;
> + unsigned long flags;
> + ktime_t read_time;
> + ktime_t t;
> + u32 reg;
> +
> + void __iomem *ppmu_base = ppmu->hw_base;
> +
> + local_irq_save(flags);
> + read_time = ktime_get();
> + /* Stop PPMU */
> + exynos_ppmu_stop(ppmu_base);
> + local_irq_restore(flags);
> +
> + /* Update local data from PPMU */
> + ppmu->ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
> + reg = __raw_readl(ppmu_base + PPMU_FLAG);
> + ppmu->ccnt_overflow = reg & PPMU_CCNT_OVERFLOW;
> +
> + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
> + if (ppmu->event[j] == 0)
> + ppmu->count[j] = 0;
> + else
> + ppmu->count[j] = exynos_ppmu_read(ppmu_base, j);
> + }
> + t = ktime_sub(read_time, ppmu->reset_time);
> + ppmu->ns = ktime_to_ns(t);
> +}
> +
> +static void exynos5_ppmu_add(struct exynos_ppmu *to, struct exynos_ppmu
> *from)
> +{
> + int i;
> + int j;
> +
> + for (i = 0; i < PPMU_END; i++) {
> + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++)
> + to[i].count[j] += from[i].count[j];
> +
> + to[i].ccnt += from[i].ccnt;
> + if (to[i].ccnt < from[i].ccnt)
> + to[i].ccnt_overflow = true;
> +
> + to[i].ns += from[i].ns;
> +
> + if (from[i].ccnt_overflow)
> + to[i].ccnt_overflow = true;
> + }
> +}
> +
> +static void exynos5_ppmu_handle_clear(struct exynos5_ppmu_handle *handle)
> +{
> + memset(&handle->ppmu, 0, sizeof(struct exynos_ppmu) * PPMU_END);
> +}
> +
> +static void exynos5_ppmu_update(void)
> +{
> + int i;
> + struct exynos5_ppmu_handle *handle;
> +
> + for (i = 0; i < PPMU_END; i++) {
> + exynos5_ppmu_read(&ppmu[i]);
> + exynos5_ppmu_reset(&ppmu[i]);
> + }
> +
> + list_for_each_entry(handle, &exynos5_ppmu_handle_list, node)
> + exynos5_ppmu_add(handle->ppmu, ppmu);
> +}
> +
> +static int exynos5_ppmu_get_filter(enum exynos5_ppmu_sets filter,
> + enum exynos5_ppmu_list *start, enum exynos5_ppmu_list *end)
> +{
> + switch (filter) {
> + case PPMU_SET_DDR:
> + *start = PPMU_DDR_C;
> + *end = PPMU_DDR_L;
> + break;
> + case PPMU_SET_RIGHT:
> + *start = PPMU_RIGHT;
> + *end = PPMU_RIGHT;
> + break;
> + case PPMU_SET_CPU:
> + *start = PPMU_CPU;
> + *end = PPMU_CPU;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +int exynos5_ppmu_get_busy(struct exynos5_ppmu_handle *handle,
> + enum exynos5_ppmu_sets filter)
> +{
> + unsigned long flags;
> + int i;
> + int busy = 0;
> + int temp;
> + enum exynos5_ppmu_list start;
> + enum exynos5_ppmu_list end;
> + int ret;
> +
> + ret = exynos5_ppmu_get_filter(filter, &start, &end);
> + if (ret < 0)
> + return ret;
> +
> + spin_lock_irqsave(&exynos5_ppmu_lock, flags);
> +
> + exynos5_ppmu_update();
> +
> + for (i = start; i <= end; i++) {
> + if (handle->ppmu[i].ccnt_overflow) {
> + busy = -EOVERFLOW;
> + break;
> + }
> + temp = handle->ppmu[i].count[PPMU_PMNCNT3] * 100;
> + if (handle->ppmu[i].ccnt > 0)
> + temp /= handle->ppmu[i].ccnt;
> + if (temp > busy)
> + busy = temp;
> + }
> +
> + exynos5_ppmu_handle_clear(handle);
> +
> + spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
> +
> + return busy;
> +}
> +
> +static void exynos5_ppmu_put(struct exynos5_ppmu_handle *handle)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(&exynos5_ppmu_lock, flags);
> +
> + list_del(&handle->node);
> +
> + spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
> +
> + kfree(handle);
> +}
> +
> +struct exynos5_ppmu_handle *exynos5_ppmu_get(void)
> +{
> + struct exynos5_ppmu_handle *handle;
> + unsigned long flags;
> +
> + handle = kzalloc(sizeof(struct exynos5_ppmu_handle), GFP_KERNEL);
> + if (!handle)
> + return NULL;
> +
> + spin_lock_irqsave(&exynos5_ppmu_lock, flags);
> +
> + exynos5_ppmu_update();
> + list_add_tail(&handle->node, &exynos5_ppmu_handle_list);
> +
> + spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
> +
> + return handle;
> +}
> +
> +static int exynos5_ppmu_trace_init(void)
> +{
> + exynos5_ppmu_trace_handle = exynos5_ppmu_get();
> + return 0;
> +}
> +late_initcall(exynos5_ppmu_trace_init);
> +
> +static void exynos5_ppmu_debug_compute(struct exynos_ppmu *ppmu,
> + enum ppmu_counter i, u32 *sat, u32 *freq, u32 *bw)
> +{
> + u64 ns = ppmu->ns;
> + u32 busy = ppmu->count[i];
> + u32 total = ppmu->ccnt;
> +
> + u64 s;
> + u64 f;
> + u64 b;
> +
> + s = (u64)busy * 100 * (1 << FIXED_POINT_OFFSET);
> + s += total / 2;
> + do_div(s, total);
> +
> + f = (u64)total * 1000 * (1 << FIXED_POINT_OFFSET);
> + f += ns / 2;
> + f = div64_u64(f, ns);
> +
> + b = (u64)busy * (128 / 8) * 1000 * (1 << FIXED_POINT_OFFSET);
> + b += ns / 2;
> + b = div64_u64(b, ns);
> +
> + *sat = s;
> + *freq = f;
> + *bw = b;
> +}
> +
> +static void exynos5_ppmu_debug_show_one_counter(struct seq_file *s,
> + const char *name, const char *type, struct exynos_ppmu *ppmu,
> + enum ppmu_counter i, u32 *bw_total)
> +{
> + u32 sat;
> + u32 freq;
> + u32 bw;
> +
> + exynos5_ppmu_debug_compute(ppmu, i, &sat, &freq, &bw);
> +
> + seq_printf(s, "%-10s %-10s %4u.%02u MBps %3u.%02u MHz %2u.%02u%%\n",
> + name, type,
> + bw >> FIXED_POINT_OFFSET,
> + (bw & FIXED_POINT_MASK) * 100 / (1 << FIXED_POINT_OFFSET),
> + freq >> FIXED_POINT_OFFSET,
> + (freq & FIXED_POINT_MASK) * 100 / (1 << FIXED_POINT_OFFSET),
> + sat >> FIXED_POINT_OFFSET,
> + (sat & FIXED_POINT_MASK) * 100 / (1 << FIXED_POINT_OFFSET));
> +
> + *bw_total += bw;
> +}
> +
> +static void exynos5_ppmu_debug_show_one(struct seq_file *s,
> + const char *name, struct exynos_ppmu *ppmu,
> + u32 *bw_total)
> +{
> + exynos5_ppmu_debug_show_one_counter(s, name, "read+write",
> + ppmu, PPMU_PMNCNT3, &bw_total[PPMU_PMNCNT3]);
> + exynos5_ppmu_debug_show_one_counter(s, "", "read",
> + ppmu, PPMU_PMNCNT0, &bw_total[PPMU_PMNCNT0]);
> + exynos5_ppmu_debug_show_one_counter(s, "", "write",
> + ppmu, PPMU_PMCCNT1, &bw_total[PPMU_PMCCNT1]);
> +
> +}
> +
> +static int exynos5_ppmu_debug_show(struct seq_file *s, void *d)
> +{
> + int i;
> + u32 bw_total[PPMU_PMNCNT_MAX];
> + struct exynos5_ppmu_handle *handle;
> + unsigned long flags;
> +
> + memset(bw_total, 0, sizeof(bw_total));
> +
> + handle = exynos5_ppmu_get();
> + msleep(100);
> +
> + spin_lock_irqsave(&exynos5_ppmu_lock, flags);
> +
> + exynos5_ppmu_update();
> +
> + for (i = 0; i < PPMU_CPU; i++)
> + exynos5_ppmu_debug_show_one(s, exynos5_ppmu_name[i],
> + &handle->ppmu[i], bw_total);
> +
> + seq_printf(s, "%-10s %-10s %4u.%02u MBps\n", "total", "read+write",
> + bw_total[PPMU_PMNCNT3] >> FIXED_POINT_OFFSET,
> + (bw_total[PPMU_PMNCNT3] & FIXED_POINT_MASK) *
> + 100 / (1 << FIXED_POINT_OFFSET));
> + seq_printf(s, "%-10s %-10s %4u.%02u MBps\n", "", "read",
> + bw_total[PPMU_PMNCNT0] >> FIXED_POINT_OFFSET,
> + (bw_total[PPMU_PMNCNT0] & FIXED_POINT_MASK) *
> + 100 / (1 << FIXED_POINT_OFFSET));
> + seq_printf(s, "%-10s %-10s %4u.%02u MBps\n", "", "write",
> + bw_total[PPMU_PMCCNT1] >> FIXED_POINT_OFFSET,
> + (bw_total[PPMU_PMCCNT1] & FIXED_POINT_MASK) *
> + 100 / (1 << FIXED_POINT_OFFSET));
> +
> + seq_printf(s, "\n");
> +
> + exynos5_ppmu_debug_show_one(s, exynos5_ppmu_name[PPMU_CPU],
> + &ppmu[PPMU_CPU], bw_total);
> +
> + spin_unlock_irqrestore(&exynos5_ppmu_lock, flags);
> +
> + exynos5_ppmu_put(handle);
> +
> + return 0;
> +}
> +
> +static int exynos5_ppmu_debug_open(struct inode *inode, struct file
*file)
> +{
> + return single_open(file, exynos5_ppmu_debug_show, inode->i_private);
> +}
> +
> +static const struct file_operations exynos5_ppmu_debug_fops = {
> + .open = exynos5_ppmu_debug_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> +};
> +
> +static int __init exynos5_ppmu_debug_init(void)
> +{
> + debugfs_create_file("exynos5_bus", S_IRUGO, NULL, NULL,
> + &exynos5_ppmu_debug_fops);
> + return 0;
> +}
> +late_initcall(exynos5_ppmu_debug_init);
> diff --git a/drivers/devfreq/exynos5_ppmu.h
> b/drivers/devfreq/exynos5_ppmu.h
> new file mode 100644
> index 0000000..24d2ec4
> --- /dev/null
> +++ b/drivers/devfreq/exynos5_ppmu.h
> @@ -0,0 +1,26 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS5 PPMU header
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef __DEVFREQ_EXYNOS5_PPMU_H
> +#define __DEVFREQ_EXYNOS5_PPMU_H __FILE__
> +
> +enum exynos5_ppmu_sets {
> + PPMU_SET_DDR,
> + PPMU_SET_RIGHT,
> + PPMU_SET_CPU,
> +};
> +
> +struct exynos5_ppmu_handle *exynos5_ppmu_get(void);
> +int exynos5_ppmu_get_busy(struct exynos5_ppmu_handle *handle,
> + enum exynos5_ppmu_sets filter);
> +
> +#endif /* __DEVFREQ_EXYNOS5_PPMU_H */
> +
> diff --git a/drivers/devfreq/exynos_ppmu.c b/drivers/devfreq/exynos_ppmu.c
> new file mode 100644
> index 0000000..85fc5ac
> --- /dev/null
> +++ b/drivers/devfreq/exynos_ppmu.c
> @@ -0,0 +1,56 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS - PPMU support
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/io.h>
> +
> +#include "exynos_ppmu.h"
> +
> +void exynos_ppmu_reset(void __iomem *ppmu_base)
> +{
> + __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base);
> + __raw_writel(PPMU_ENABLE_CYCLE |
> + PPMU_ENABLE_COUNT0 |
> + PPMU_ENABLE_COUNT1 |
> + PPMU_ENABLE_COUNT2 |
> + PPMU_ENABLE_COUNT3,
> + ppmu_base + PPMU_CNTENS);
> +}
> +
> +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
> + unsigned int evt)
> +{
> + __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch));
> +}
> +
> +void exynos_ppmu_start(void __iomem *ppmu_base)
> +{
> + __raw_writel(PPMU_ENABLE, ppmu_base);
> +}
> +
> +void exynos_ppmu_stop(void __iomem *ppmu_base)
> +{
> + __raw_writel(PPMU_DISABLE, ppmu_base);
> +}
> +
> +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch)
> +{
> + unsigned int total;
> +
> + if (ch == PPMU_PMNCNT3)
> + total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) |
> + __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1)));
> + else
> + total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch));
> +
> + return total;
> +}
> diff --git a/drivers/devfreq/exynos_ppmu.h b/drivers/devfreq/exynos_ppmu.h
> new file mode 100644
> index 0000000..b46d31b
> --- /dev/null
> +++ b/drivers/devfreq/exynos_ppmu.h
> @@ -0,0 +1,79 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS PPMU header
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef __DEVFREQ_EXYNOS_PPMU_H
> +#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
> +
> +#include <linux/ktime.h>
> +
> +/* For PPMU Control */
> +#define PPMU_ENABLE BIT(0)
> +#define PPMU_DISABLE 0x0
> +#define PPMU_CYCLE_RESET BIT(1)
> +#define PPMU_COUNTER_RESET BIT(2)
> +
> +#define PPMU_ENABLE_COUNT0 BIT(0)
> +#define PPMU_ENABLE_COUNT1 BIT(1)
> +#define PPMU_ENABLE_COUNT2 BIT(2)
> +#define PPMU_ENABLE_COUNT3 BIT(3)
> +#define PPMU_ENABLE_CYCLE BIT(31)
> +
> +#define PPMU_CNTENS 0x10
> +#define PPMU_FLAG 0x50
> +#define PPMU_CCNT_OVERFLOW BIT(31)
> +#define PPMU_CCNT 0x100
> +
> +#define PPMU_PMCNT0 0x110
> +#define PPMU_PMCNT_OFFSET 0x10
> +#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET *
x))
> +
> +#define PPMU_BEVT0SEL 0x1000
> +#define PPMU_BEVTSEL_OFFSET 0x100
> +#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch *
> PPMU_BEVTSEL_OFFSET))
> +
> +/* For Event Selection */
> +#define RD_DATA_COUNT 0x5
> +#define WR_DATA_COUNT 0x6
> +#define RDWR_DATA_COUNT 0x7
> +
> +enum ppmu_counter {
> + PPMU_PMNCNT0,
> + PPMU_PMCCNT1,
> + PPMU_PMNCNT2,
> + PPMU_PMNCNT3,
> + PPMU_PMNCNT_MAX,
> +};
> +
> +struct bus_opp_table {
> + unsigned int idx;
> + unsigned long clk;
> + unsigned long volt;
> +};
> +
> +struct exynos_ppmu {
> + void __iomem *hw_base;
> + unsigned int ccnt;
> + unsigned int event[PPMU_PMNCNT_MAX];
> + unsigned int count[PPMU_PMNCNT_MAX];
> + unsigned long long ns;
> + ktime_t reset_time;
> + bool ccnt_overflow;
> + bool count_overflow[PPMU_PMNCNT_MAX];
> +};
> +
> +void exynos_ppmu_reset(void __iomem *ppmu_base);
> +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
> + unsigned int evt);
> +void exynos_ppmu_start(void __iomem *ppmu_base);
> +void exynos_ppmu_stop(void __iomem *ppmu_base);
> +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
> +#endif /* __DEVFREQ_EXYNOS_PPMU_H */
> +
> --
> 1.6.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
