Brian Dushaw ([EMAIL PROTECTED]) wrote :
> Dear Linux Kernel Wisemen,
> I have been following the discussion of the VIA vt82c686b chipset
> and the troubles people have had in getting UDMA(100) to work. This
> is to report that I have now tried the 2.4.2-ac20 kernel and the
> 2.2.18 kernel with Andre's patch (dated March 20) and neither of
> them get the disk speed up to where it ought to be. hdparm -t reports
> back 11 MB/s or so for either kernel.
> VIA82CXXX enabled, and I also tried the ide0=ata66 flag, in desparation.
> At boot up both kernels report the disk as UDMA(100) - everything
> seems to be peachy keen, but for the sluggish disk performance.
>
> Merely a report from the front lines,
>
> B.D.
Do you also have IDE_AUTO_WHATEVER option enabled ,
as suggested ( no, commanded ) in the VIA_IDE_OPTION help text ?
( press '?' when selecting the VIA IDE driver option )
cat /proc/ide/via ?
What do you think is the "correct" transfer rate of the disk ?
For the record , I have a MSI K7T Pro2A board ( VIA KT133 with a
vt82c686b south bridge ) and a IBM DTLA 307045 hard drive on a 80
wire IDE cable ( set to CABLE-SELECT , connected to the end connector;
you must always first use both connectors on the end of the cable !
never left one end unused )
Without doing any settings with hdparm, I get the full transfer rate
of the disk, measured with hdparm : ~35MB/s
kernel is 2.4.recent or redhat recent 2.4.x versions.
--
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
