3.5.7.2 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Fritz <[email protected]>

commit 3d5e2abe6e265acc5e1fda810301243e9bac92b2 upstream.

This patch sets HPM (Host power mask bit) to bit 16 according to i.MX
Reference Manual. Falsely it was set to bit 8, but this controls pull-up
Impedance.

Reported-by: Michael Burkey <[email protected]>
Signed-off-by: Christoph Fritz <[email protected]>
Acked-by: Eric BĂ©nard <[email protected]>
Signed-off-by: Sascha Hauer <[email protected]>
[ herton: adjust context ]
Signed-off-by: Herton Ronaldo Krzesinski <[email protected]>
---
 arch/arm/mach-imx/ehci-imx25.c |    2 +-
 arch/arm/mach-imx/ehci-imx35.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 865daf0..dabc5d5 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -27,7 +27,7 @@
 
 #define MX25_H1_SIC_SHIFT      21
 #define MX25_H1_SIC_MASK       (0x3 << MX25_H1_SIC_SHIFT)
-#define MX25_H1_PM_BIT         (1 << 8)
+#define MX25_H1_PM_BIT         (1 << 16)
 #define MX25_H1_IPPUE_UP_BIT   (1 << 7)
 #define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
 #define MX25_H1_TLL_BIT                (1 << 5)
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 001ec39..8ea2dfa 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -27,7 +27,7 @@
 
 #define MX35_H1_SIC_SHIFT      21
 #define MX35_H1_SIC_MASK       (0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PM_BIT         (1 << 8)
+#define MX35_H1_PM_BIT         (1 << 16)
 #define MX35_H1_IPPUE_UP_BIT   (1 << 7)
 #define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
 #define MX35_H1_TLL_BIT                (1 << 5)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to