On 12/20/2012 09:07 AM, Wolfgang Grandegger wrote: > On 12/20/2012 08:08 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: >> On 22:22 Wed 19 Dec , Roland Stigge wrote: >>> This patch adds block GPIO support to several gpio drivers. >>> >>> This implements block GPIO only for some selected drivers since block GPIO >>> is >>> an optional feature which may not be suitable for every GPIO hardware. (With >>> automatic fallback to the single GPIO functions if not available in a >>> driver.) >>> >>> Signed-off-by: Roland Stigge <[email protected]> >>> >>> --- >>> arch/arm/mach-at91/gpio.c | 33 +++++++++++++++ >> as said on the previous version the mach-at91 is deprecated for this platform >> and boards >> >> you MUST updatethe drivers/pinctrl/pinctrl-at91 >> >> nack on at91 untill this is done > > I suggest to drop the hunk for the AT91 for the moment and wait until > the block gpio interface is accepted. Then we can add the block gpio > enhancement to the GPIO drivers in arch/... not only for the AT91... > also because they have to go through different sub-systems maintainers.
OK, thank you two! Will remove the at91 patch from the current series. Block GPIO support for at91 can be added later. I just noticed that the patch set needs another patch not yet in mainline, but in linux-next, linux-gpio and gpio/next. I'm providing a branch to easily pull from for testing, building on v3.7: git://git.antcom.de/linux-2.6.git blockgpio Feedback welcome - thanks! Roland -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
