On Thu, 20 Dec 2012 14:45:52 -0800, David Cohen <[email protected]> wrote:
> From: "Li, Ning" <[email protected]>
> 
> Disable falling/rising edge detection during irq shutdown operation.

Why? (A commit description should also say why a change is needed. Not
just what it does)

g.

> 
> Signed-off-by: David Cohen <[email protected]>
> Signed-off-by: Li, Ning <[email protected]>
> ---
>  drivers/gpio/gpio-langwell.c |   21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
> index 2be69fe..10cc520 100644
> --- a/drivers/gpio/gpio-langwell.c
> +++ b/drivers/gpio/gpio-langwell.c
> @@ -225,11 +225,32 @@ static void lnw_irq_mask(struct irq_data *d)
>  {
>  }
>  
> +static void lnw_irq_shutdown(struct irq_data *d)
> +{
> +     struct lnw_gpio *lnw = irq_data_get_irq_chip_data(d);
> +     u32 gpio = irqd_to_hwirq(d);
> +     unsigned long flags;
> +     u32 value;
> +     void __iomem *grer = gpio_reg(&lnw->chip, gpio, GRER);
> +     void __iomem *gfer = gpio_reg(&lnw->chip, gpio, GFER);
> +
> +     spin_lock_irqsave(&lnw->lock, flags);
> +
> +     /* Disable falling/rising edge detection */
> +     value = readl(grer) & ~BIT(gpio % 32);
> +     writel(value, grer);
> +     value = readl(gfer) & ~BIT(gpio % 32);
> +     writel(value, gfer);
> +
> +     spin_unlock_irqrestore(&lnw->lock, flags);
> +};
> +
>  static struct irq_chip lnw_irqchip = {
>       .name           = "LNW-GPIO",
>       .irq_mask       = lnw_irq_mask,
>       .irq_unmask     = lnw_irq_unmask,
>       .irq_set_type   = lnw_irq_type,
> +     .irq_shutdown   = lnw_irq_shutdown,
>  };
>  
>  static DEFINE_PCI_DEVICE_TABLE(lnw_gpio_ids) = {   /* pin number */
> -- 
> 1.7.10.4
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to