This set of patches adds: * Add pinctrl-single for handling Padconf registers. * Add NAND node to export NAND functionality on da850 EVM. * Add NAND pinctrl node to do pin mux according to pinctrl-single driver.
This series applies on top of tag next-20130107 git tree https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git and the following patch -drivers/pinctrl: grab default handles from device core https://patchwork.kernel.org/patch/1862231/ This series is tested on da850 EVM. Changes since V4: -Cosmetic changes. Changes since V3: -Move NAND related pinctrl DT data into the da850.dtsi file so it can be reused. Changes since V2: -Move NAND pins configuration into the nand_cs3 DT node to avoid pins configuration if it is not probed. Changes since V1: -Remove the binding documentation as already documented as part of Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt -Enable PINCTRL Kconfig for MACH_DA8XX_DT platform only. -Fix the pinctrl driver node unit-address. -Make separate patch for da8xx_omapl_defconfig changes. Kumar, Anil (3): ARM: davinci: da850: add pinctrl driver DT entries ARM: davinci: da8xx defconfig: enable pinctrl config option ARM: davinci: da850: add NAND driver DT entries arch/arm/boot/dts/da850-evm.dts | 8 ++++++ arch/arm/boot/dts/da850.dtsi | 40 ++++++++++++++++++++++++++++++++ arch/arm/configs/da8xx_omapl_defconfig | 1 + arch/arm/mach-davinci/Kconfig | 1 + 4 files changed, 50 insertions(+), 0 deletions(-) -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
