Some pin configurations IP allows to set the current output to the pin. This patch adds such a parameter to the pinconf-generic mechanism.
This parameter takes as argument the drive strength in mA. Signed-off-by: Maxime Ripard <[email protected]> --- include/linux/pinctrl/pinconf-generic.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 47a1bdd..c533789 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -46,6 +46,8 @@ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source * (open emitter). Sending this config will enabale open drain mode, the * argument is ignored. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as + * argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin. * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, @@ -74,6 +76,7 @@ enum pin_config_param { PIN_CONFIG_DRIVE_PUSH_PULL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, + PIN_CONFIG_DRIVE_STRENGTH, PIN_CONFIG_INPUT_SCHMITT_DISABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_DEBOUNCE, -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
