On 01/25/2013 09:16 AM, Linus Walleij wrote:
> On Tue, Jan 22, 2013 at 10:10 PM, Gregory CLEMENT
> <gregory.clem...@free-electrons.com> wrote:
>
>> Now that pca953x driver can handle GPIO expanders with more than 32
>> bits this patch adds the support for the pca9505 which cam with 40
>> GPIOs.
>>
>> Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
>
> Patch applied, thanks.
>
> But guys, this driver contains some horrific stuff, look at this:
>
> static int pxa_gpio_nums(void)
> {
> int count = 0;
>
> #ifdef CONFIG_ARCH_PXA
> if (cpu_is_pxa25x()) {
> #ifdef CONFIG_CPU_PXA26x
> count = 89;
> gpio_type = PXA26X_GPIO;
> #elif defined(CONFIG_PXA25x)
> count = 84;
> gpio_type = PXA26X_GPIO;
> #endif /* CONFIG_CPU_PXA26x */
> } else if (cpu_is_pxa27x()) {
> count = 120;
> gpio_type = PXA27X_GPIO;
> } else if (cpu_is_pxa93x()) {
> count = 191;
> gpio_type = PXA93X_GPIO;
> } else if (cpu_is_pxa3xx()) {
> count = 127;
> gpio_type = PXA3XX_GPIO;
> }
> #endif /* CONFIG_ARCH_PXA */
>
> #ifdef CONFIG_ARCH_MMP
> if (cpu_is_pxa168() || cpu_is_pxa910()) {
> count = 127;
> gpio_type = MMP_GPIO;
> } else if (cpu_is_mmp2()) {
> count = 191;
> gpio_type = MMP_GPIO;
> }
> #endif /* CONFIG_ARCH_MMP */
> return count;
> }
>
> This is totally killing all attempts at a single kernel for multiple
> machines in this family. The above should not be #ifdef's but instead
> use either platform data or the compatible property to figure out which
> one to use.
>
> It's fine to introduce new compatible= strings or device names to
> distinguish between these.
>
> As an example, in pinctrl-nomadik.c we have this:
>
> static const struct of_device_id nmk_pinctrl_match[] = {
> {
> .compatible = "stericsson,nmk_pinctrl",
> .data = (void *)PINCTRL_NMK_DB8500,
> },
> {},
> };
>
> static const struct platform_device_id nmk_pinctrl_id[] = {
> { "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
> { "pinctrl-db8500", PINCTRL_NMK_DB8500 },
> { "pinctrl-db8540", PINCTRL_NMK_DB8540 },
> { }
> };
>
> static struct platform_driver nmk_pinctrl_driver = {
> .driver = {
> .owner = THIS_MODULE,
> .name = "pinctrl-nomadik",
> .of_match_table = nmk_pinctrl_match,
> },
> .probe = nmk_pinctrl_probe,
> .id_table = nmk_pinctrl_id,
> };
>
>
> The first match is for DT boot the latter for using the platform
> device name directly.
>
> Then in the probefunction we do:
>
> static int nmk_pinctrl_probe(struct platform_device *pdev)
> {
> const struct platform_device_id *platid =
> platform_get_device_id(pdev);
> (...)
> if (platid)
> version = platid->driver_data;
> else if (np) {
> const struct of_device_id *match;
>
> match = of_match_device(nmk_pinctrl_match, &pdev->dev);
> if (!match)
> return -ENODEV;
> version = (unsigned int) match->data;
> }
> (...)
> if (version == PINCTRL_NMK_STN8815)
> nmk_pinctrl_stn8815_init(&npct->soc);
> if (version == PINCTRL_NMK_DB8500)
> nmk_pinctrl_db8500_init(&npct->soc);
> if (version == PINCTRL_NMK_DB8540)
> nmk_pinctrl_db8540_init(&npct->soc);
> }
>
> Surely a scheme like this must be possible to use to distinguish between
> the different versions at runtime rather than using these #ifdefs?
>
Well, at the beginning I thought adding support for pca9505 was just a matter
of a couple of lines to add. Then I realized that I need to handle the 40 bits
case, and I ended up refactoring all access to the registers. So now I am on it,
it seems I am volunteer to continue to improve this driver.
However I won't be able to test it, the only PXA based platform I have is a
Zaurus SL-C3100 which embeds a PXA270 if I remember well, but I doubt it come
with gpio expander on i2c.
Gregory
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
