The platform data is used not only by wlcore-based drivers, but also
by wl1251. Move it up in the directory hierarchy to reflect this.
Additionally, make it truly optional. At the moment, disabling
platform data while wl1251_sdio or wlcore_sdio are enabled doesn't
work, but it will be necessary when device tree support is
implemented.
Signed-off-by: Luciano Coelho <coe...@ti.com>
Reviewed-by: Felipe Balbi <ba...@ti.com>
---
In v2:
* Fix ti/Makefile
* Modify board_omap3evm.c which was still using the old Kconfig define
Tony, is it okay if I add this change in the omap3evm board in this
patch and queue it via wireless so that the whole thing is in sync?
arch/arm/mach-omap2/board-omap3evm.c | 10 +++++-----
drivers/net/wireless/ti/Kconfig | 9 +++++++++
drivers/net/wireless/ti/Makefile | 4 +++-
.../wl12xx_platform_data.c => wilink_platform_data.c} | 0
drivers/net/wireless/ti/wlcore/Kconfig | 5 -----
drivers/net/wireless/ti/wlcore/Makefile | 3 ---
include/linux/wl12xx.h | 14 +++++++++++---
7 files changed, 28 insertions(+), 17 deletions(-)
rename drivers/net/wireless/ti/{wlcore/wl12xx_platform_data.c =>
wilink_platform_data.c} (100%)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35..a4ca63b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = 63,
.deferred = true,
},
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
{
.name = "wl1271",
.mmc = 2,
@@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = {
.consumer_supplies = omap3evm_vio_supply,
};
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
@@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata
= {
OMAP_PIN_OFF_NONE),
OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
@@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata
= {
OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
@@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = {
static void __init omap3_evm_wl12xx_init(void)
{
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
int ret;
/* WL12xx WLAN Init */
diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig
index be80011..cbe1e7f 100644
--- a/drivers/net/wireless/ti/Kconfig
+++ b/drivers/net/wireless/ti/Kconfig
@@ -12,4 +12,13 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig"
# keep last for automatic dependencies
source "drivers/net/wireless/ti/wlcore/Kconfig"
+
+config WILINK_PLATFORM_DATA
+ bool "TI WiLink platform data"
+ depends on WLCORE_SDIO || WL1251_SDIO
+ default y
+ ---help---
+ Small platform data bit needed to pass data to the sdio modules.
+
+
endif # WL_TI
diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile
index 4d68239..af14231 100644
--- a/drivers/net/wireless/ti/Makefile
+++ b/drivers/net/wireless/ti/Makefile
@@ -1,5 +1,7 @@
obj-$(CONFIG_WLCORE) += wlcore/
obj-$(CONFIG_WL12XX) += wl12xx/
-obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/
obj-$(CONFIG_WL1251) += wl1251/
obj-$(CONFIG_WL18XX) += wl18xx/
+
+# small builtin driver bit
+obj-$(CONFIG_WILINK_PLATFORM_DATA) += wilink_platform_data.o
diff --git a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c
b/drivers/net/wireless/ti/wilink_platform_data.c
similarity index 100%
rename from drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c
rename to drivers/net/wireless/ti/wilink_platform_data.c
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig
b/drivers/net/wireless/ti/wlcore/Kconfig
index d7b907e..2b83282 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -33,8 +33,3 @@ config WLCORE_SDIO
If you choose to build a module, it'll be called wlcore_sdio.
Say N if unsure.
-
-config WL12XX_PLATFORM_DATA
- bool
- depends on WLCORE_SDIO != n || WL1251_SDIO != n
- default y
diff --git a/drivers/net/wireless/ti/wlcore/Makefile
b/drivers/net/wireless/ti/wlcore/Makefile
index d9fba9e..b21398f 100644
--- a/drivers/net/wireless/ti/wlcore/Makefile
+++ b/drivers/net/wireless/ti/wlcore/Makefile
@@ -9,7 +9,4 @@ obj-$(CONFIG_WLCORE) += wlcore.o
obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o
obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o
-# small builtin driver bit
-obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o
-
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 360c9bc..a54fe82 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -24,6 +24,8 @@
#ifndef _LINUX_WL12XX_H
#define _LINUX_WL12XX_H
+#include <linux/err.h>
+
/* Reference clock values */
enum {
WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
@@ -60,10 +62,12 @@ struct wl12xx_platform_data {
/* Platform does not support level trigger interrupts */
#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0)
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
+struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+
#else
static inline
@@ -72,8 +76,12 @@ int wl12xx_set_platform_data(const struct
wl12xx_platform_data *data)
return -ENOSYS;
}
-#endif
+static inline
+struct wl12xx_platform_data *wl12xx_get_platform_data(void)
+{
+ return ERR_PTR(-ENODATA);
+}
-struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+#endif
#endif
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
