On 02/13/2013 07:47 AM, Christophe Leroy wrote:
> This patch adds support for Analog Devices AD7923 ADC in the IIO Subsystem.
>
> Signed-off-by: Patrick Vasseur <patrick.vass...@c-s.fr>
> Signed-off-by: Christophe Leroy <christophe.le...@c-s.fr>
Looks good, thanks.
Reviewed-by: Lars-Peter Clausen <l...@metafoo.de>
>
> diff -urN linux-next-e347c98/drivers/iio/adc/Kconfig
> linux-next-e347c98.new/drivers/iio/adc/Kconfig
> --- linux-next-e347c98/drivers/iio/adc/Kconfig 2013-02-08
> 05:22:35.000000000 +0100
> +++ linux-next-e347c98.new/drivers/iio/adc/Kconfig 2013-02-12
> 13:02:52.000000000 +0100
> @@ -30,6 +30,18 @@
> To compile this driver as a module, choose M here: the
> module will be called ad7298.
>
> +config AD7923
> + tristate "Analog Devices AD7923 ADC driver"
> + depends on SPI
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> + help
> + Say yes here to build support for Analog Devices AD7923
> + 4 Channel ADC with temperature sensor.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ad7923.
> +
> config AD7791
> tristate "Analog Devices AD7791 ADC driver"
> depends on SPI
> diff -urN linux-next-e347c98/drivers/iio/adc/Makefile
> linux-next-e347c98.new/drivers/iio/adc/Makefile
> --- linux-next-e347c98/drivers/iio/adc/Makefile 2013-02-08
> 05:22:35.000000000 +0100
> +++ linux-next-e347c98.new/drivers/iio/adc/Makefile 2013-02-12
> 13:03:02.000000000 +0100
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
> obj-$(CONFIG_AD7266) += ad7266.o
> obj-$(CONFIG_AD7298) += ad7298.o
> +obj-$(CONFIG_AD7923) += ad7923.o
> obj-$(CONFIG_AD7476) += ad7476.o
> obj-$(CONFIG_AD7791) += ad7791.o
> obj-$(CONFIG_AD7793) += ad7793.o
> diff -urN linux-next-e347c98/drivers/iio/adc/ad7923.c
> linux-next-e347c98.new/drivers/iio/adc/ad7923.c
> --- linux-next-e347c98/drivers/iio/adc/ad7923.c 1970-01-01
> 01:00:00.000000000 +0100
> +++ linux-next-e347c98.new/drivers/iio/adc/ad7923.c 2013-02-13
> 02:03:38.000000000 +0100
> @@ -0,0 +1,298 @@
> +/*
> + * AD7923 SPI ADC driver
> + *
> + * Copyright 2011 Analog Devices Inc (from AD7923 Driver)
> + * Copyright 2012 CS Systemes d'Information
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/spi/spi.h>
> +#include <linux/err.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#define AD7923_WRITE_CR (1 << 11) /* write control
> register */
> +#define AD7923_RANGE (1 << 1) /* range to REFin */
> +#define AD7923_CODING (1 << 0) /* coding is straight
> binary */
> +#define AD7923_PM_MODE_AS (1) /* auto shutdown */
> +#define AD7923_PM_MODE_FS (2) /* full shutdown */
> +#define AD7923_PM_MODE_OPS (3) /* normal operation */
> +#define AD7923_CHANNEL_0 (0) /* analog input 0 */
> +#define AD7923_CHANNEL_1 (1) /* analog input 1 */
> +#define AD7923_CHANNEL_2 (2) /* analog input 2 */
> +#define AD7923_CHANNEL_3 (3) /* analog input 3 */
> +#define AD7923_SEQUENCE_OFF (0) /* no sequence fonction */
> +#define AD7923_SEQUENCE_PROTECT (2) /* no interrupt write
> cycle */
> +#define AD7923_SEQUENCE_ON (3) /* continuous sequence */
> +
> +#define AD7923_MAX_CHAN 4
> +
> +#define AD7923_PM_MODE_WRITE(mode) (mode << 4) /* write mode */
> +#define AD7923_CHANNEL_WRITE(channel) (channel << 6) /* write
> channel */
> +#define AD7923_SEQUENCE_WRITE(sequence) (((sequence & 1) << 3) \
> + + ((sequence & 2) << 9))
> + /* write sequence fonction */
> +/* left shift for CR : bit 11 transmit in first */
> +#define AD7923_SHIFT_REGISTER 4
> +
> +/* val = value, dec = left shift, bits = number of bits of the mask */
> +#define EXTRACT(val, dec, bits) ((val >> dec) & ((1 << bits) -
> 1))
> +
> +struct ad7923_state {
> + struct spi_device *spi;
> + struct spi_transfer ring_xfer[5];
> + struct spi_transfer scan_single_xfer[2];
> + struct spi_message ring_msg;
> + struct spi_message scan_single_msg;
> + /*
> + * DMA (thus cache coherency maintenance) requires the
> + * transfer buffers to live in their own cache lines.
> + */
> + __be16 rx_buf[4] ____cacheline_aligned;
> + __be16 tx_buf[4];
> +};
> +
> +#define AD7923_V_CHAN(index) \
> + { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .channel = index, \
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
> + IIO_CHAN_INFO_SCALE_SHARED_BIT, \
> + .address = index, \
> + .scan_index = index, \
> + .scan_type = { \
> + .sign = 'u', \
> + .realbits = 12, \
> + .storagebits = 16, \
> + .endianness = IIO_BE, \
> + }, \
> + }
> +
> +static const struct iio_chan_spec ad7923_channels[] = {
> + AD7923_V_CHAN(0),
> + AD7923_V_CHAN(1),
> + AD7923_V_CHAN(2),
> + AD7923_V_CHAN(3),
> + IIO_CHAN_SOFT_TIMESTAMP(4),
> +};
> +
> +/**
> + * ad7923_update_scan_mode() setup the spi transfer buffer for the new scan
> mask
> + **/
> +static int ad7923_update_scan_mode(struct iio_dev *indio_dev,
> + const unsigned long *active_scan_mask)
> +{
> + struct ad7923_state *st = iio_priv(indio_dev);
> + int i, cmd, len;
> +
> + len = 0;
> + for_each_set_bit(i, active_scan_mask, AD7923_MAX_CHAN) {
> + cmd = AD7923_WRITE_CR | AD7923_CODING | AD7923_RANGE |
> + AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS) |
> + AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
> + AD7923_CHANNEL_WRITE(i);
> + cmd <<= AD7923_SHIFT_REGISTER;
> + st->tx_buf[len++] = cpu_to_be16(cmd);
> + }
> + /* build spi ring message */
> + st->ring_xfer[0].tx_buf = &st->tx_buf[0];
> + st->ring_xfer[0].len = len;
> + st->ring_xfer[0].cs_change = 1;
> +
> + spi_message_init(&st->ring_msg);
> + spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg);
> +
> + for (i = 0; i < len; i++) {
> + st->ring_xfer[i + 1].rx_buf = &st->rx_buf[i];
> + st->ring_xfer[i + 1].len = 2;
> + st->ring_xfer[i + 1].cs_change = 1;
> + spi_message_add_tail(&st->ring_xfer[i + 1], &st->ring_msg);
> + }
> + /* make sure last transfer cs_change is not set */
> + st->ring_xfer[i + 1].cs_change = 0;
> +
> + return 0;
> +}
> +
> +/**
> + * ad7923_trigger_handler() bh of trigger launched polling to ring buffer
> + *
> + * Currently there is no option in this driver to disable the saving of
> + * timestamps within the ring.
> + **/
> +static irqreturn_t ad7923_trigger_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct ad7923_state *st = iio_priv(indio_dev);
> + s64 time_ns = 0;
> + int b_sent;
> +
> + b_sent = spi_sync(st->spi, &st->ring_msg);
> + if (b_sent)
> + goto done;
> +
> + if (indio_dev->scan_timestamp) {
> + time_ns = iio_get_time_ns();
> + memcpy((u8 *)st->rx_buf + indio_dev->scan_bytes - sizeof(s64),
> + &time_ns, sizeof(time_ns));
> + }
> +
> + iio_push_to_buffers(indio_dev, (u8 *)st->rx_buf);
> +
> +done:
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int ad7923_scan_direct(struct ad7923_state *st, unsigned ch)
> +{
> + int ret, cmd;
> +
> + cmd = AD7923_WRITE_CR | AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS) |
> + AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) | AD7923_CODING |
> + AD7923_CHANNEL_WRITE(ch) | AD7923_RANGE;
> + cmd <<= AD7923_SHIFT_REGISTER;
> + st->tx_buf[0] = cpu_to_be16(cmd);
> +
> + ret = spi_sync(st->spi, &st->scan_single_msg);
> + if (ret)
> + return ret;
> +
> + return be16_to_cpu(st->rx_buf[0]);
> +}
> +
> +static int ad7923_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val,
> + int *val2,
> + long m)
> +{
> + int ret;
> + struct ad7923_state *st = iio_priv(indio_dev);
> +
> + switch (m) {
> + case IIO_CHAN_INFO_RAW:
> + mutex_lock(&indio_dev->mlock);
> + if (iio_buffer_enabled(indio_dev))
> + ret = -EBUSY;
> + else
> + ret = ad7923_scan_direct(st, chan->address);
> + mutex_unlock(&indio_dev->mlock);
> +
> + if (ret < 0)
> + return ret;
> +
> + if (chan->address == EXTRACT(ret, 12, 4))
> + *val = EXTRACT(ret, 0, 12);
> +
> + return IIO_VAL_INT;
> + }
> + return -EINVAL;
> +}
> +
> +static const struct iio_info ad7923_info = {
> + .read_raw = &ad7923_read_raw,
> + .update_scan_mode = ad7923_update_scan_mode,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int ad7923_probe(struct spi_device *spi)
> +{
> + struct ad7923_state *st;
> + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
> + int ret;
> +
> + if (indio_dev == NULL)
> + return -ENOMEM;
> +
> + st = iio_priv(indio_dev);
> +
> + spi_set_drvdata(spi, indio_dev);
> +
> + st->spi = spi;
> +
> + indio_dev->name = spi_get_device_id(spi)->name;
> + indio_dev->dev.parent = &spi->dev;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = ad7923_channels;
> + indio_dev->num_channels = ARRAY_SIZE(ad7923_channels);
> + indio_dev->info = &ad7923_info;
> +
> + /* Setup default message */
> +
> + st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
> + st->scan_single_xfer[0].len = 2;
> + st->scan_single_xfer[0].cs_change = 1;
> + st->scan_single_xfer[1].rx_buf = &st->rx_buf[0];
> + st->scan_single_xfer[1].len = 2;
> +
> + spi_message_init(&st->scan_single_msg);
> + spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg);
> + spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg);
> +
> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
> + &ad7923_trigger_handler, NULL);
> + if (ret)
> + goto error_free;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret)
> + goto error_cleanup_ring;
> +
> + return 0;
> +
> +error_cleanup_ring:
> + iio_triggered_buffer_cleanup(indio_dev);
> +error_free:
> + iio_device_free(indio_dev);
> +
> + return ret;
> +}
> +
> +static int ad7923_remove(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev = spi_get_drvdata(spi);
> +
> + iio_device_unregister(indio_dev);
> + iio_triggered_buffer_cleanup(indio_dev);
> + iio_device_free(indio_dev);
> +
> + return 0;
> +}
> +
> +static const struct spi_device_id ad7923_id[] = {
> + {"ad7923", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(spi, ad7923_id);
> +
> +static struct spi_driver ad7923_driver = {
> + .driver = {
> + .name = "ad7923",
> + .owner = THIS_MODULE,
> + },
> + .probe = ad7923_probe,
> + .remove = ad7923_remove,
> + .id_table = ad7923_id,
> +};
> +module_spi_driver(ad7923_driver);
> +
> +MODULE_AUTHOR("Michael Hennerich <henner...@blackfin.uclinux.org>");
> +MODULE_AUTHOR("Patrick Vasseur <patrick.vass...@c-s.fr>");
> +MODULE_DESCRIPTION("Analog Devices AD7923 ADC");
> +MODULE_LICENSE("GPL v2");
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
