Instead of just faking a random value for the DIMM data, get
the information that it is available via DMI table.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
drivers/edac/ghes_edac.c | 192 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 180 insertions(+), 12 deletions(-)
diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 52625b5..7bd7161 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -1,5 +1,6 @@
#include <acpi/ghes.h>
#include <linux/edac.h>
+#include <linux/dmi.h>
#include "edac_core.h"
#define GHES_PFX "ghes_edac: "
@@ -8,6 +9,155 @@
static DEFINE_MUTEX(ghes_edac_lock);
static int ghes_edac_mc_num;
+/* Memory Device - Type 17 of SMBIOS spec */
+struct memdev_dmi_entry {
+ u8 type;
+ u8 length;
+ u16 handle;
+ u16 phys_mem_array_handle;
+ u16 mem_err_info_handle;
+ u16 total_width;
+ u16 data_width;
+ u16 size;
+ u8 form_factor;
+ u8 device_set;
+ u8 device_locator;
+ u8 bank_locator;
+ u8 memory_type;
+ u16 type_detail;
+ u16 speed;
+ u8 manufacturer;
+ u8 serial_number;
+ u8 asset_tag;
+ u8 part_number;
+ u8 attributes;
+ u32 extended_size;
+ u16 conf_mem_clk_speed;
+} __attribute__((__packed__));
+
+struct ghes_edac_dimm_fill {
+ struct mem_ctl_info *mci;
+ unsigned count;
+};
+
+char *memory_type[] = {
+ [MEM_EMPTY] = "EMPTY",
+ [MEM_RESERVED] = "RESERVED",
+ [MEM_UNKNOWN] = "UNKNOWN",
+ [MEM_FPM] = "FPM",
+ [MEM_EDO] = "EDO",
+ [MEM_BEDO] = "BEDO",
+ [MEM_SDR] = "SDR",
+ [MEM_RDR] = "RDR",
+ [MEM_DDR] = "DDR",
+ [MEM_RDDR] = "RDDR",
+ [MEM_RMBS] = "RMBS",
+ [MEM_DDR2] = "DDR2",
+ [MEM_FB_DDR2] = "FB_DDR2",
+ [MEM_RDDR2] = "RDDR2",
+ [MEM_XDR] = "XDR",
+ [MEM_DDR3] = "DDR3",
+ [MEM_RDDR3] = "RDDR3",
+};
+
+static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg)
+{
+ int *num_dimm = arg;
+
+ if (dh->type == DMI_ENTRY_MEM_DEVICE)
+ (*num_dimm)++;
+}
+
+static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
+{
+ struct ghes_edac_dimm_fill *dimm_fill = arg;
+ struct mem_ctl_info *mci = dimm_fill->mci;
+
+ if (dh->type == DMI_ENTRY_MEM_DEVICE) {
+ struct memdev_dmi_entry *entry = (struct memdev_dmi_entry *)dh;
+ struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+ mci->n_layers,
+ dimm_fill->count, 0, 0);
+
+ if (entry->size == 0xffff) {
+ pr_info(GHES_PFX "Can't get dimm size\n");
+ dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */
+ } else if (entry->size == 0x7fff) {
+ dimm->nr_pages = MiB_TO_PAGES(entry->extended_size);
+ } else {
+ if (entry->size & 1 << 15)
+ dimm->nr_pages = MiB_TO_PAGES((entry->size &
+ 0x7fff) << 10);
+ else
+ dimm->nr_pages = MiB_TO_PAGES(entry->size);
+ }
+
+ switch(entry->memory_type) {
+ case 0x12:
+ if (entry->type_detail & 1 << 13)
+ dimm->mtype = MEM_RDDR;
+ else
+ dimm->mtype = MEM_DDR;
+ break;
+ case 0x13:
+ if (entry->type_detail & 1 << 13)
+ dimm->mtype = MEM_RDDR2;
+ else
+ dimm->mtype = MEM_DDR2;
+ break;
+ case 0x14:
+ dimm->mtype = MEM_FB_DDR2;
+ break;
+ case 0x18:
+ if (entry->type_detail & 1 << 13)
+ dimm->mtype = MEM_RDDR3;
+ else
+ dimm->mtype = MEM_DDR3;
+ break;
+ default:
+ if (entry->type_detail & 1 << 6)
+ dimm->mtype = MEM_RMBS;
+ else if ((entry->type_detail & ((1 << 7) | (1 << 13)))
+ == ((1 << 7) | (1 << 13)))
+ dimm->mtype = MEM_RDR;
+ else if (entry->type_detail & 1 << 7)
+ dimm->mtype = MEM_SDR;
+ else if (entry->type_detail & 1 << 9)
+ dimm->mtype = MEM_EDO;
+ else
+ dimm->mtype = MEM_UNKNOWN;
+ }
+
+ /*
+ * Actually, we can only detect if the memory has bits for
+ * checksum or not
+ */
+ if (entry->total_width == entry->data_width)
+ dimm->edac_mode = EDAC_NONE;
+ else
+ dimm->edac_mode = EDAC_SECDED;
+
+ dimm->dtype = DEV_UNKNOWN;
+ dimm->grain = 128; /* Likely, worse case */
+
+ /*
+ * FIXME: It shouldn't be hard to also fill the DIMM labels
+ */
+
+ if (dimm->nr_pages) {
+ pr_info(GHES_PFX "DIMM%i: %s size = %d MB%s\n",
+ dimm_fill->count, memory_type[dimm->mtype],
+ PAGES_TO_MiB(dimm->nr_pages),
+ (dimm->edac_mode != EDAC_NONE)? "(ECC)" : "");
+ pr_info (GHES_PFX "\ttype %d, detail 0x%02x, width
%d(total %d)\n",
+ entry->memory_type, entry->type_detail,
+ entry->total_width, entry->data_width);
+ }
+
+ dimm_fill->count++;
+ }
+}
+
void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
struct cper_sec_mem_err *mem_err)
{
@@ -50,14 +200,23 @@ EXPORT_SYMBOL_GPL(ghes_edac_report_mem_error);
int ghes_edac_register(struct ghes *ghes, struct device *dev)
{
- int rc;
+ bool fake = false;
+ int rc, num_dimm = 0;
struct mem_ctl_info *mci;
struct edac_mc_layer layers[1];
- struct csrow_info *csrow;
- struct dimm_info *dimm;
+ struct ghes_edac_dimm_fill dimm_fill;
+
+ /* Get the number of DIMMs */
+ dmi_walk(ghes_edac_count_dimms, &num_dimm);
+
+ /* Check if we've got a bogus BIOS */
+ if (num_dimm == 0) {
+ fake = true;
+ num_dimm = 1;
+ }
layers[0].type = EDAC_MC_LAYER_ALL_MEM;
- layers[0].size = 1;
+ layers[0].size = num_dimm;
layers[0].is_virt_csrow = true;
/*
@@ -65,6 +224,8 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
* to avoid duplicated memory controller numbers
*/
mutex_lock(&ghes_edac_lock);
+ pr_info("ghes_edac#%d: allocating space for %d dimms\n",
+ ghes_edac_mc_num, num_dimm);
mci = edac_mc_alloc(ghes_edac_mc_num, ARRAY_SIZE(layers), layers, 0);
if (!mci) {
pr_info(GHES_PFX "Can't allocate memory for EDAC data\n");
@@ -83,15 +244,22 @@ int ghes_edac_register(struct ghes *ghes, struct device
*dev)
mci->ctl_name = "ghes_edac";
mci->dev_name = "ghes";
- csrow = mci->csrows[0];
- dimm = csrow->channels[0]->dimm;
+ if (!fake) {
+ /* Fill DIMM info from DMI */
+ dimm_fill.count = 0;
+ dimm_fill.mci = mci;
+ dmi_walk (ghes_edac_dmidecode, &dimm_fill);
+ } else {
+ struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+ mci->n_layers, 0, 0, 0);
- /* FIXME: FAKE DATA */
- dimm->nr_pages = 1000;
- dimm->grain = 128;
- dimm->mtype = MEM_UNKNOWN;
- dimm->dtype = DEV_UNKNOWN;
- dimm->edac_mode = EDAC_SECDED;
+ pr_info(GHES_PFX "Crappy BIOS detected. Faking DIMM EDAC
data\n");
+ dimm->nr_pages = 1000;
+ dimm->grain = 128;
+ dimm->mtype = MEM_UNKNOWN;
+ dimm->dtype = DEV_UNKNOWN;
+ dimm->edac_mode = EDAC_SECDED;
+ }
rc = edac_mc_add_mc(mci);
if (rc < 0) {
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
