On 02/19/2013 11:51 AM, Lars-Peter Clausen wrote:
The adp5520 unfortunately also clears the BL_EN bit when the nSTNDBY bit is
cleared. So we need to make sure to restore it during resume if it was set
before suspend.
Cc: [email protected]
Signed-off-by: Lars-Peter Clausen <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
---
drivers/mfd/adp5520.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index 210dd03..6b40e0c 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -36,6 +36,7 @@ struct adp5520_chip {
struct blocking_notifier_head notifier_list;
int irq;
unsigned long id;
+ uint8_t mode;
};
static int __adp5520_read(struct i2c_client *client,
@@ -326,7 +327,10 @@ static int adp5520_suspend(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
- adp5520_clr_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+ adp5520_read(chip->dev, ADP5520_MODE_STATUS, &chip->mode);
+ /* All other bits are W1C */
+ chip->mode &= ADP5520_BL_EN | ADP5520_DIM_EN | ADP5520_nSTNBY;
+ adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0);
return 0;
}
@@ -335,7 +339,7 @@ static int adp5520_resume(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
- adp5520_set_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+ adp5520_write(chip->dev, ADP5520_MODE_STATUS, chip->mode);
return 0;
}
#endif
--
Greetings,
Michael
--
Analog Devices GmbH Wilhelm-Wagenfeld-Str. 6 80807 Muenchen
Sitz der Gesellschaft: Muenchen; Registergericht: Muenchen HRB 40368;
Geschaeftsfuehrer:Dr.Carsten Suckrow, Thomas Wessel, William A. Martin,
Margaret Seif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
