Thank you Marko. This was exactly what I was looking for. And thank you very much
Omar Kilani for the retrofit. But kernel doesn't recognize the adapter.
Installed the patch, compiled, installed, & everything seemed to go fine. Booted to
IDE... no problems, except the DPT HA wasn't recognized. There was no mention of the
DPT in messages, either recognized as hardware, nor to load the driver.
I am running an MSI KT7Turbo mobo with Athlon 850. Six PCI & no IDE. DPT PM3755F
fibrechannel host adapter is in the first slot & has two Cheetahs attached. Outfit
works fine in Winders2k. Trying to move to kernel 2.4.2, in RedHat Wolverine.
Please help.
--
C.
The best way out is always through.
- Robert Frost A Servant to Servants, 1914
Marko Kreen wrote:
> On Sat, Apr 14, 2001 at 05:33:02PM -0600, [EMAIL PROTECTED] wrote:
> > I have been unable to set up a module for my DPT fibrechannel host adapter, partly
>through unavailability, and partly through inexperience.
>
> There is a nice suppary of current DPT driver status on Kernel
> Traffic #113:
>
> http://kt.zork.net/kernel-traffic/kt20010330_113.html#3
>
> --
> marko
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
