Hello,
Under 2.4.3 I manage uploading photo from my Digital IXUS using USB_UHCI
with s10h, but under ac series, I don't manage, only other things I have
changed is removing devfs which I don't need in fact...
from dmesg (2.4.3):
...
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 01:30:35 Mar 31 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 7 for device 00:04.2
PCI: The same IRQ used for device 00:06.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
...
And as I power on my camera:
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x4a9/0x3047) is not claimed by any
active driver.
from dmesg (2.4.3-ac7):
...
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 22:57:47 Apr 16 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 7 for device 00:04.2
PCI: The same IRQ used for device 00:06.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
...
And as I power on my camera:
hub.c: USB new device connect on bus1/1, assigned device number 2
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 3
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)
Do I need some special dev, here are those I have under /dev/usb:
dabusb0 dabusb3 dc2xx10 dc2xx5 lp12 lp7 mdc80014 mdc8009
scanner15 ttyUSB0 ttyUSB3
dabusb1 dabusb4 dc2xx11 dc2xx6 lp13 lp8 mdc80015 rio500
scanner2 ttyUSB1 ttyUSB4
dabusb10 dabusb5 dc2xx12 dc2xx7 lp14 lp9 mdc8002 scanner0
scanner3 ttyUSB10 ttyUSB5
dabusb11 dabusb6 dc2xx13 dc2xx8 lp15 mdc8000 mdc8003 scanner1
scanner4 ttyUSB11 ttyUSB6
dabusb12 dabusb7 dc2xx14 dc2xx9 lp2 mdc8001 mdc8004 scanner10
scanner5 ttyUSB12 ttyUSB7
dabusb13 dabusb8 dc2xx15 lp0 lp3 mdc80010 mdc8005 scanner11
scanner6 ttyUSB13 ttyUSB8
dabusb14 dabusb9 dc2xx2 lp1 lp4 mdc80011 mdc8006 scanner12
scanner7 ttyUSB14 ttyUSB9
dabusb15 dc2xx0 dc2xx3 lp10 lp5 mdc80012 mdc8007 scanner13
scanner8 ttyUSB15
dabusb2 dc2xx1 dc2xx4 lp11 lp6 mdc80013 mdc8008 scanner14
scanner9 ttyUSB2
I don't think, because under 2.4.3 with devfs, /dev/usb is empty...
Thanks you in advance for your help,
Greg
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
