Hello Tim ,
On Tue, 17 Apr 2001, Mr. James W. Laferriere wrote:
> On Tue, 17 Apr 2001, Tim Waugh wrote:
> > [...]
> > > /c#eodiecnyotai rhernili s to rpaemn
> > > s eehpo o-.ROLPR0 roif{\=sl:x
> > > /p:ao/lr
> > This looks like characters are getting missed out, rather than
> > anything getting garbled. The above characters all appear in
> > /etc/printcap in the order shown. Obviously there isn't enough
> > redundancy in /etc/printcap for the print-out to be useful despite
> > that. :-)
> ;-) .
> > Please try adjusting the 'udelay (1)' lines in
> > drivers/parport/ieee1284_ops.c:parport_ieee1284_write_compat to be
> > larger delays (for example, try replacing the 1s with 2s, or 5s, and
> > see if that makes things better).
> I am going to look and see if there might be a ioctl for that
> function . Failing that I shall recompile the kernel with each
> of those values & test until successful or it seems futile .
Ok , There isn't a sysctl available to do that . I am also a
little worried about the 'none' in ths below .
root@udragon:~# sysctl -A | grep -i parp
dev.parport.parport0.devices.active = none
dev.parport.parport0.modes =
dev.parport.parport0.dma = -1
dev.parport.parport0.irq = 6814784
dev.parport.parport0.base-addr = 2198696099840 0
dev.parport.parport0.spintime = 500
dev.parport.default.spintime = 500
dev.parport.default.timeslice = 200
But I do see timeslices in the 'lp' of /proc/...
dir /proc/sys/dev/parport/parport0/devices/lp
total 0
0 dr-xr-xr-x 2 root root 0 Apr 17 17:26 ./
0 dr-xr-xr-x 3 root root 0 Apr 17 17:26 ../
0 -rw-r--r-- 1 root root 0 Apr 17 17:26 timeslice
Off to build 3 kernels on this old tub . Twyl , JimL
> > Let me know what you need to change to get it working.
> > Thanks,
> > Tim.
> > */
+----------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 25416 22nd So | Give me Linux |
| [EMAIL PROTECTED] | DesMoines WA 98198 | only on AXP |
+----------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
