Call the setpower platform callback in response to set_ios with
ios->power_mode == MMC_POWER_UP or MMC_POWER_OFF, instead of from the
card detect work function.
This appears to fix a problem I have where a card stuck in a funny state
doesn't get properly cleared by the power being turned off, presumably
due to lack of power sequencing. This resulted in the following log
messages after boot:
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 300000Hz, actual
298922HZ div = 167)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 200000Hz, actual
199680HZ div = 250)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 195765Hz, actual
195764HZ div = 255)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 400000Hz, actual
399360HZ div = 125)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 300000Hz, actual
298922HZ div = 167)
Signed-off-by: James Hogan <james.ho...@imgtec.com>
Cc: Seungwon Jeon <tgih....@samsung.com>
Cc: Jaehoon Chung <jh80.ch...@samsung.com>
Cc: Chris Ball <c...@laptop.org>
---
drivers/mmc/host/dw_mmc.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 60063cc..1a42c7c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -818,6 +818,14 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_UP:
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
+ /* Power up slot */
+ if (slot->host->pdata->setpower)
+ slot->host->pdata->setpower(slot->id, mmc->ocr_avail);
+ break;
+ case MMC_POWER_OFF:
+ /* Power down slot */
+ if (slot->host->pdata->setpower)
+ slot->host->pdata->setpower(slot->id, 0);
break;
default:
break;
@@ -1674,10 +1682,6 @@ static void dw_mci_work_routine_card(struct work_struct
*work)
dev_dbg(&slot->mmc->class_dev, "card %s\n",
present ? "inserted" : "removed");
- /* Power up slot (before spin_lock, may sleep) */
- if (present != 0 && host->pdata->setpower)
- host->pdata->setpower(slot->id, mmc->ocr_avail);
-
spin_lock_bh(&host->lock);
/* Card change detected */
@@ -1760,10 +1764,6 @@ static void dw_mci_work_routine_card(struct work_struct
*work)
spin_unlock_bh(&host->lock);
- /* Power down slot (after spin_unlock, may sleep) */
- if (present == 0 && host->pdata->setpower)
- host->pdata->setpower(slot->id, 0);
-
present = dw_mci_get_cd(mmc);
}
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
