Hi Laxman, On Fri, Mar 01, 2013 at 08:13:46PM +0530, Laxman Dewangan wrote: > Currently driver sets the irq type to IRQF_TRIGGER_LOW which is > causing interrupt registration failure in ARM based SoCs as: > [ 0.208479] genirq: Setting trigger mode 8 for irq 118 failed > (gic_set_type+0x0/0xf0) > [ 0.208513] dummy 0-0059: Failed to request IRQ 118: -22 > > Provide the irq flags through platform data if device is registered > through board file or get the irq type from DT node property in place > of hardcoding the irq flag in driver to support multiple platforms. > > Also configure the device to generate the interrupt signal according to > flag type. > > Signed-off-by: Laxman Dewangan <[email protected]> > --- > Changes from V1: > - Use palmas_update_bits() for rea/modiy/write. > > drivers/mfd/palmas.c | 36 +++++++++++++++++++++++++++++++++--- > include/linux/mfd/palmas.h | 1 + > 2 files changed, 34 insertions(+), 3 deletions(-) Patch applied to my mfd-fixes tree now.
Cheers, Samuel. -- Intel Open Source Technology Centre http://oss.intel.com/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
