This patch check the pointer of platform data to protect kernel panic when platform data is not used and code clean.
Signed-off-by: Chanwoo Choi <[email protected]> Signed-off-by: Myungjoo Ham <[email protected]> --- drivers/extcon/extcon-max8997.c | 56 +++++++++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 22 deletions(-) diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index e636d95..69641bc 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -712,29 +712,45 @@ static int max8997_muic_probe(struct platform_device *pdev) goto err_irq; } - /* Initialize registers according to platform data */ if (pdata->muic_pdata) { - struct max8997_muic_platform_data *mdata = info->muic_pdata; - - for (i = 0; i < mdata->num_init_data; i++) { - max8997_write_reg(info->muic, mdata->init_data[i].addr, - mdata->init_data[i].data); + struct max8997_muic_platform_data *muic_pdata + = pdata->muic_pdata; + + /* Initialize registers according to platform data */ + for (i = 0; i < muic_pdata->num_init_data; i++) { + max8997_write_reg(info->muic, + muic_pdata->init_data[i].addr, + muic_pdata->init_data[i].data); } - } - /* - * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB - * h/w path of COMP2/COMN1 on CONTROL1 register. - */ - if (pdata->muic_pdata->path_uart) - info->path_uart = pdata->muic_pdata->path_uart; - else - info->path_uart = CONTROL1_SW_UART; + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + if (muic_pdata->path_uart) + info->path_uart = muic_pdata->path_uart; + else + info->path_uart = CONTROL1_SW_UART; - if (pdata->muic_pdata->path_usb) - info->path_usb = pdata->muic_pdata->path_usb; - else + if (muic_pdata->path_usb) + info->path_usb = muic_pdata->path_usb; + else + info->path_usb = CONTROL1_SW_USB; + + /* + * Default delay time for detecting cable state + * after certain time. + */ + if (muic_pdata->detcable_delay_ms) + delay_jiffies = + msecs_to_jiffies(muic_pdata->detcable_delay_ms); + else + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + } else { + info->path_uart = CONTROL1_SW_UART; info->path_usb = CONTROL1_SW_USB; + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + } /* Set initial path for UART */ max8997_muic_set_path(info, info->path_uart, true); @@ -751,10 +767,6 @@ static int max8997_muic_probe(struct platform_device *pdev) * driver should notify cable state to upper layer. */ INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq); - if (pdata->muic_pdata->detcable_delay_ms) - delay_jiffies = msecs_to_jiffies(pdata->muic_pdata->detcable_delay_ms); - else - delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); schedule_delayed_work(&info->wq_detcable, delay_jiffies); return 0; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
