Prabhakar,

On 3/22/2013 1:33 PM, Prabhakar lad wrote:
> From: Lad, Prabhakar <prabhakar.cse...@gmail.com>
> 
> Create platform devices for various video modules like venc,osd,
> vpbe and v4l2 driver for dm365.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.cse...@gmail.com>
> ---
>  arch/arm/mach-davinci/board-dm365-evm.c |    4 +-
>  arch/arm/mach-davinci/davinci.h         |    2 +-
>  arch/arm/mach-davinci/dm365.c           |  194 
> +++++++++++++++++++++++++++++--
>  3 files changed, 188 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c 
> b/arch/arm/mach-davinci/board-dm365-evm.c
> index c2d4958..cf77c46 100644
> --- a/arch/arm/mach-davinci/board-dm365-evm.c
> +++ b/arch/arm/mach-davinci/board-dm365-evm.c
> @@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata 
> = {
>  
>  static void __init dm365_evm_map_io(void)
>  {
> -     /* setup input configuration for VPFE input devices */
> -     dm365_set_vpfe_config(&vpfe_cfg);
>       dm365_init();
>  }
>  
> @@ -597,6 +595,8 @@ static __init void dm365_evm_init(void)
>  
>       davinci_setup_mmc(0, &dm365evm_mmc_config);
>  
> +     dm365_init_video(&vpfe_cfg, NULL);
> +
>       /* maybe setup mmc1/etc ... _after_ mmc0 */
>       evm_init_cpld();
>  
> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
> index 12d544b..1c2670f 100644
> --- a/arch/arm/mach-davinci/davinci.h
> +++ b/arch/arm/mach-davinci/davinci.h
> @@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data 
> *pdata);
>  void __init dm365_init_rtc(void);
>  void dm365_init_spi0(unsigned chipselect_mask,
>                       const struct spi_board_info *info, unsigned len);
> -void dm365_set_vpfe_config(struct vpfe_config *cfg);
> +int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *);

No need of __init specifier in function declaration.

>  
>  /* DM644x function declarations */
>  void __init dm644x_init(void);
> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
> index f4c19f7..0a2dba2 100644
> --- a/arch/arm/mach-davinci/dm365.c
> +++ b/arch/arm/mach-davinci/dm365.c
> @@ -40,10 +40,16 @@
>  
>  #define DM365_REF_FREQ               24000000        /* 24 MHz on the DM365 
> EVM */
>  
> +#define DM365_VDAC_CONFIG            0x01c4002c

Please define this in davinci.h as an offset from
DAVINCI_SYSTEM_MODULE_BASE.

> +
> +#define DM365_RTC_BASE                       0x01c69000
> +
>  /* Base of key scan register bank */
>  #define DM365_KEYSCAN_BASE           0x01c69400
>  
> -#define DM365_RTC_BASE                       0x01c69000
> +#define DM365_OSD_BASE                       0x01c71c00
> +
> +#define DM365_VENC_BASE                      0x01c71e00
>  
>  #define DAVINCI_DM365_VC_BASE                0x01d0c000
>  #define DAVINCI_DMA_VC_TX            2
> @@ -56,6 +62,11 @@
>  #define DM365_EMAC_CNTRL_RAM_OFFSET  0x1000
>  #define DM365_EMAC_CNTRL_RAM_SIZE    0x2000
>  
> +#define DM365_VPSS_CLK_CTRL_ADDR             0x44

This is already defined in davinci.h as SYSMOD_VPSS_CLKCTL. Please use
the existing definition.

> +#define DM365_VPSS_VENCCLKEN_ENABLE          BIT(3)
> +#define DM365_VPSS_DACCLKEN_ENABLE           BIT(4)
> +#define DM365_VPSS_PLLC2SYSCLK5_ENABLE               BIT(5)

Please move these related defintions to davinci.h as well.

> +
>  static struct pll_data pll1_data = {
>       .num            = 1,
>       .phys_base      = DAVINCI_PLL1_BASE,
> @@ -1233,6 +1244,179 @@ static struct platform_device dm365_isif_dev = {
>       },
>  };
>  
> +static struct resource dm365_osd_resources[] = {
> +     {
> +             .start = DM365_OSD_BASE,
> +             .end   = DM365_OSD_BASE + 0x100,

You ignored by earlier comment to fix this to 0xFF and other such
occurrences in this patch.

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to