On Mon, Mar 25, 2013 at 13:44:37, Nori, Sekhar wrote: > On 3/25/2013 1:19 PM, Philip Avinash wrote: > > Add platform support for EHRPWM and ECAP by providing clock nodes and > > device tree nodes. > > This series depends on [1] and [2] and is available for testing at [3]. > > Tested for back light support in da850 EVM with EHRPWM PWM device. > > > > [1] > > http://gitorious.org/linux-davinci/linux-davinci/trees/davinci-for-v3.9/dt-2 > > [2] https://gitorious.org/linux-pwm/linux-pwm/trees/for-next > > [3] > > https://github.com/avinashphilip/am335x_linux/tree/davinci-for-v3.9_soc_pwm > > > > Note: > > DT support for EHRPWM backlight has not been added in da850-evm.dts as > > there is > > conflicting pin-mux requirement with SPI flash. > > > > Philip Avinash (3): > > ARM: davinci: clk framework support for enable/disable functionality > > Patch 1/3 did not reach me. I cant find it in archives either so most > likely no one received it. Can you please send that one patch again?
Done. > > > arm: davinci: clock node support for ECAP & EHRPWM > > For future, please be consistent and capitalize 'ARM' in subject line. Ok I will take care. Thanks Avinash > > > ARM: davinci: da850: add EHRPWM & ECAP DT node > > > > arch/arm/boot/dts/da850.dtsi | 30 ++++++++++++++++++ > > arch/arm/mach-davinci/clock.c | 21 ++++++++----- > > arch/arm/mach-davinci/clock.h | 2 ++ > > arch/arm/mach-davinci/da850.c | 46 > > ++++++++++++++++++++++++++++ > > arch/arm/mach-davinci/da8xx-dt.c | 5 +++ > > arch/arm/mach-davinci/include/mach/da8xx.h | 1 + > > 6 files changed, 98 insertions(+), 7 deletions(-) > > > > Thanks, > Sekhar >
