When older variants of the HREF (earlier than v22) development platform enter suspend mode, power down EXT_SUPPLY1.
Signed-off-by: Lee Jones <[email protected]> --- arch/arm/mach-ux500/board-mop500-regulators.c | 17 +++++++++++++++++ arch/arm/mach-ux500/board-mop500-regulators.h | 2 ++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 22dfaf3..2a2751e 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> +#include <mach/id.h> /* to identify older boards for fixes */ #include "board-mop500-regulators.h" static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { @@ -494,3 +495,19 @@ static void ab8500_modify_reg_init(int id, u8 mask, u8 value) BUG_ON(1); } + +void mop500_regulator_init(void) +{ + struct regulator_init_data *regulator; + + /* + * Handle VextSupply1 on older boards than HREFP_V22_V1x + * (turn off in suspend) + */ + if (cpu_is_u8500v20() || cpu_is_u8500v21()) { + /* disable VextSupply1 in suspend */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY1]; + regulator->constraints.state_mem.disabled = 1; + regulator->constraints.state_standby.disabled = 1; + } +} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 9ca4869..3d4c412 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -18,4 +18,6 @@ extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; +void mop500_regulator_init(void); + #endif -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
