From: Patrice Chotard <[email protected]> Add necessary definitions to support ab8500-musb pinctrl default and sleep states.
Signed-off-by: Patrice Chotard <[email protected]> Signed-off-by: Fabio Baltieri <[email protected]> --- arch/arm/mach-ux500/board-mop500-pins.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 625880f..ca0649e 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -48,8 +48,12 @@ BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED| @@ -306,8 +310,23 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ /* Mux in USB pins, drive STP high */ - DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), - DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ + /* USB default state */ + DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"), + DB8500_PIN("GPIO257_AE29", out_hi, "musbux500.0"), /* STP */ + /* USB sleep state */ + DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */ + DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */ + DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */ + DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */ + DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */ + DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */ + DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */ + /* Mux in SPI2 pins on the "other C1" altfunction */ DB8500_MUX("spi2_oc1_2", "spi2", "spi2"), DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ -- 1.8.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
