On 4/2/2013 5:24 PM, Prabhakar lad wrote: > From: Lad, Prabhakar <prabhakar.cse...@gmail.com> > > Create platform devices for various video modules like venc,osd, > vpbe and v4l2 driver for dm365. > > Signed-off-by: Lad, Prabhakar <prabhakar.cse...@gmail.com>
Minor nits below: > diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c > index c61dd94..786c860 100644 > --- a/arch/arm/mach-davinci/dm365.c > +++ b/arch/arm/mach-davinci/dm365.c > @@ -40,10 +40,14 @@ > > #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 > EVM */ > > +#define DM365_RTC_BASE 0x01c69000 > + > /* Base of key scan register bank */ > #define DM365_KEYSCAN_BASE 0x01c69400 > > -#define DM365_RTC_BASE 0x01c69000 > +#define DM365_OSD_BASE 0x01c71c00 > + > +#define DM365_VENC_BASE 0x01c71e00 > > #define DAVINCI_DM365_VC_BASE 0x01d0c000 No need of empty lines between these definitions. While at it you can also remove the useless comment "/* Base of key scan register bank */" > +static int dm365_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type, > + int field) > +{ > + switch (if_type) { > + case V4L2_MBUS_FMT_SGRBG8_1X8: > + davinci_cfg_reg(DM365_VOUT_FIELD_G81); > + davinci_cfg_reg(DM365_VOUT_COUTL_EN); > + davinci_cfg_reg(DM365_VOUT_COUTH_EN); > + break; > + No need of these empty lines after 'break'. Here and other places below. The patch looks good overall though so you can fix the nits and add: Acked-by: Sekhar Nori <nsek...@ti.com> Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/