[Forwarded to a recent address of Guenter, as the ericsson address
bounces.]
Paul Bolle
On Thu, 2013-04-04 at 12:08 +0200, Paul Bolle wrote:
> In v3.2 the Analog Devices AD7314 temperature sensor driver was removed
> as an IIO driver and added as a HWMON driver. But it was apparently
> overlooked to rename two references to CONFIG_AD7314 to
> CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while
> we're at it.
>
> Signed-off-by: Paul Bolle <pebo...@tiscali.nl>
> ---
> 0) Entirely untested.
>
> 1) See commits 4f3a659581cabf1be441d6467b523be914615496 ("hwmon: AD7314
> driver (ported from IIO)") and 48a2c3799b7141c271a771d3249142a104faeefc
> ("staging:iio:adc:ad7314 removal. Supported via hwmon.") for the two
> patches involved.
>
> arch/blackfin/mach-bf537/boards/stamp.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/blackfin/mach-bf537/boards/stamp.c
> b/arch/blackfin/mach-bf537/boards/stamp.c
> index 23bb55d..b40b849 100644
> --- a/arch/blackfin/mach-bf537/boards/stamp.c
> +++ b/arch/blackfin/mach-bf537/boards/stamp.c
> @@ -681,7 +681,7 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
> };
> #endif
>
> -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
> +#if IS_ENABLED(CONFIG_SENSORS_AD7314)
> static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
> .enable_dma = 0,
> };
> @@ -1039,7 +1039,7 @@ static struct spi_board_info bfin_spi_board_info[]
> __initdata = {
> },
> #endif
>
> -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
> +#if IS_ENABLED(CONFIG_SENSORS_AD7314)
> {
> .modalias = "ad7314",
> .max_speed_hz = 1000000,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
