Add auart3 2 pins configuration on its main pads
Signed-off-by: Eric Bénard <e...@eukrea.com>
---
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 13799cf..5c45f29 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -343,6 +343,17 @@
fsl,pull-up = <0>;
};
+ auart3_2pins_b: auart3-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x30c0 /*
MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /*
MX28_PAD_AUART3_TX__AUART3_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
