Avinash,
On 4/10/2013 1:32 PM, Philip Avinash wrote:
> Add da850 EHRPWM & ECAP DT node along with pin-mux details for EHRPWM1.
> Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP
> clock.
>
> Signed-off-by: Philip Avinash <avinashphi...@ti.com>
> ---
> Changes since v3:
> - add pin mux info for EHRPWM1.
I think you misunderstood what I asked. Please add pinmux information
for all the nodes you are adding (ecap0-2 and ehrpwm0). Without pinmux
setup, these IPs cannot be used anyway. So why leave just the pinmux to
be added by someone else?
Thanks,
Sekhar
>
> Changes since v1:
> - Reusing ti,am33xx<ecap/ehrpwm> as compatible field as both IP's are
> similar with am33xx platform and da850 has no platform specific
> dependency.
>
> arch/arm/boot/dts/da850.dtsi | 42
> ++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-davinci/da8xx-dt.c | 5 +++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 3ade343..3bff30d 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -71,6 +71,18 @@
> 0x28 0x00222222 0x00ffffff
> >;
> };
> + ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
> + pinctrl-single,bits = <
> + /* EPWM1A */
> + 0x14 0x00000002 0x0000000f
> + >;
> + };
> + ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
> + pinctrl-single,bits = <
> + /* EPWM1B */
> + 0x14 0x00000020 0x000000f0
> + >;
> + };
> };
> serial0: serial@1c42000 {
> compatible = "ns16550a";
> @@ -122,6 +134,36 @@
> interrupts = <16>;
> status = "disabled";
> };
> + ehrpwm0: ehrpwm@01f00000 {
> + compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
> + #pwm-cells = <3>;
> + reg = <0x300000 0x2000>;
> + status = "disabled";
> + };
> + ehrpwm1: ehrpwm@01f02000 {
> + compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
> + #pwm-cells = <3>;
> + reg = <0x302000 0x2000>;
> + status = "disabled";
> + };
> + ecap0: ecap@01f06000 {
> + compatible = "ti,da850-ecap", "ti,am33xx-ecap";
> + #pwm-cells = <3>;
> + reg = <0x306000 0x80>;
> + status = "disabled";
> + };
> + ecap1: ecap@01f07000 {
> + compatible = "ti,da850-ecap", "ti,am33xx-ecap";
> + #pwm-cells = <3>;
> + reg = <0x307000 0x80>;
> + status = "disabled";
> + };
> + ecap2: ecap@01f08000 {
> + compatible = "ti,da850-ecap", "ti,am33xx-ecap";
> + #pwm-cells = <3>;
> + reg = <0x308000 0x80>;
> + status = "disabled";
> + };
> };
> nand_cs3@62000000 {
> compatible = "ti,davinci-nand";
> diff --git a/arch/arm/mach-davinci/da8xx-dt.c
> b/arch/arm/mach-davinci/da8xx-dt.c
> index d83de8f..05bb9a2 100644
> --- a/arch/arm/mach-davinci/da8xx-dt.c
> +++ b/arch/arm/mach-davinci/da8xx-dt.c
> @@ -41,6 +41,11 @@ struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
> OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
> OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
> OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
> + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),
> + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL),
> + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL),
> + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
> + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
> {}
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
