Jingoo, On Sat, May 11, 2013 at 1:09 AM, Jingoo Han <[email protected]> wrote: > Add pin state information for DP HPD support that requires > pin configuration support using pinctrl interface. > > Signed-off-by: Jingoo Han <[email protected]> > --- > Tested on Exynos5250 > > arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 7 +++++++ > arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +++ > 2 files changed, 10 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi > b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi > index d1650fb..e9cdee3 100644 > --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi > +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi > @@ -553,6 +553,13 @@ > samsung,pin-pud = <0>; > samaung,pin-drv = <0>; > }; > + > + dp_hpd: dp_hpd { > + samsung,pins = "gpx0-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samaung,pin-drv = <0>; > + }; > }; > > pinctrl@13400000 { > diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts > b/arch/arm/boot/dts/exynos5250-smdk5250.dts > index 3e0c792..d53ea34 100644 > --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts > +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts > @@ -224,6 +224,9 @@ > samsung,color-depth = <1>; > samsung,link-rate = <0x0a>; > samsung,lane-count = <4>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&dp_hpd>;
I was going to suggest moving this to exynos5250.dtsi but then realized that I saw a board recently that used a non-standard HPD pin recently! ...so keeping it in the board file (like you've done) is good. ...so looks good to me. Reviewed-by: Doug Anderson <[email protected]> -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
