On 05/17/2013 11:17 AM, Dan Murphy wrote: > On 05/17/2013 11:15 AM, Nishanth Menon wrote: >> On 11:02-20130517, Dan Murphy wrote: >>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es >>> are different. >>> >>> A1-A3 = gpio_wk7 >>> ES = gpio_110 >>> >>> There is no change to LED D2 >>> >>> Abstract away the pinmux and the LED definitions for the two boards into >>> the respective DTS files. >>> >>> Signed-off-by: Dan Murphy <dmur...@ti.com> >>> --- >>> Changes in this version: >>> - review comments incorporated. >>> Previous version of this patch was discussed in: >>> https://patchwork.kernel.org/patch/2582771/ >> one minor nit, >> $subject could do with space after the ':' >> otherwise, it looks fine to me. Will suggest waiting for further >> reviewers if they have an opinion prior to a new rev. > Thanks NM I will queue up this change locally and await further review prior > to sending v7. > >>> arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++- >>> arch/arm/boot/dts/omap4-panda-es.dts | 28 >>> ++++++++++++++++++++++++++++ >>> 2 files changed, 43 insertions(+), 1 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi >>> b/arch/arm/boot/dts/omap4-panda-common.dtsi >>> index 03bd60d..5fd59b3 100644 >>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi >>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi >>> @@ -16,8 +16,13 @@ >>> reg = <0x80000000 0x40000000>; /* 1 GB */ >>> }; >>> >>> - leds { >>> + leds: leds { >>> compatible = "gpio-leds"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = < >>> + &led_wkgpio_pins >>> + >; >>> + >>> heartbeat { >>> label = "pandaboard::status1"; >>> gpios = <&gpio1 7 0>; >>> @@ -137,6 +142,15 @@ >>> }; >>> }; >>> >>> +&omap4_pmx_wkup { >>> + led_wkgpio_pins: pinmux_leds_wkpins { >>> + pinctrl-single,pins = < >>> + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */ >>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >>> + >; >>> + }; >>> +}; >>> + >>> &i2c1 { >>> pinctrl-names = "default"; >>> pinctrl-0 = <&i2c1_pins>; >>> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts >>> b/arch/arm/boot/dts/omap4-panda-es.dts >>> index f1d8c21..c968a3b 100644 >>> --- a/arch/arm/boot/dts/omap4-panda-es.dts >>> +++ b/arch/arm/boot/dts/omap4-panda-es.dts >>> @@ -34,3 +34,31 @@ >>> 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ >>> >; >>> }; >>> + >>> +&omap4_pmx_core { >>> + led_gpio_pins: gpio_led_pmx { >>> + pinctrl-single,pins = < >>> + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */ >>> + >; >>> + }; >>> +}; >>> + >>> +&led_wkgpio_pins { >>> + pinctrl-single,pins = < >>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >>> + >; >>> +}; >>> + >>> +&leds { >>> + pinctrl-0 = < >>> + &led_gpio_pins >>> + &led_wkgpio_pins >>> + >; >>> + >>> + heartbeat { >>> + gpios = <&gpio4 14 0>; >>> + }; >>> + mmc { >>> + gpios = <&gpio1 8 0>; >>> + }; >>> +}; > Any additional comments besides the headline?
If not I will post v7 -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
