From: Brian Lilly <br...@crystalfontz.com>
The early prototypes had the chip select pin for the LCD controller
wired on the GPIO 3-23, while the production run of the CFA-10049 have
this chip select on the GPIO 3-5.
Signed-off-by: Brian Lilly <br...@crystalfontz.com>
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
arch/arm/boot/dts/imx28-cfa10049.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts
b/arch/arm/boot/dts/imx28-cfa10049.dts
index 063e620..fa91af5 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -33,7 +33,7 @@
0x1163 /*
MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /*
MX28_PAD_LCD_D22__GPIO_1_23 */
0x2153 /*
MX28_PAD_SSP2_D5__GPIO_2_21 */
- 0x3173 /*
MX28_PAD_LCD_RESET__GPIO_3_23 */
+ 0x3053 /*
MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@@ -265,7 +265,7 @@
gpio-sck = <&gpio2 16 0>;
gpio-mosi = <&gpio2 17 0>;
gpio-miso = <&gpio2 18 0>;
- cs-gpios = <&gpio3 23 0>;
+ cs-gpios = <&gpio3 5 0>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
--
1.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
