S5P_ARM_CORE1_* registers affect only core 1. To control further cores
properly another registers must be used.
This patch replaces S5P_ARM_CORE1_* register definitions with
S5P_ARM_CORE_*(x) macro which return addresses of registers for specified
core.
This fixes CPU hotplug on quad core Exynos SoCs on which currently
offlining CPUs 2 or 3 caused CPU 1 to be turned off. In addition,
bring-up of CPU 2 and 3 is fixed on boards where bootloader powers off
secondary cores by default.
Cc: sta...@vger.kernel.org
Signed-off-by: Tomasz Figa <t.f...@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---
arch/arm/mach-exynos/hotplug.c | 9 +++++----
arch/arm/mach-exynos/include/mach/regs-pmu.h | 10 +++++++---
arch/arm/mach-exynos/platsmp.c | 9 +++++----
3 files changed, 17 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index af90cfa..c089943 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -93,10 +93,11 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
for (;;) {
+ void __iomem *reg_base;
+ unsigned int phys_cpu = cpu_logical_map(cpu);
- /* make cpu1 to be turned off at next WFI command */
- if (cpu == 1)
- __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+ reg_base = S5P_ARM_CORE_CONFIGURATION(phys_cpu);
+ __raw_writel(0, reg_base);
/*
* here's the WFI
@@ -106,7 +107,7 @@ static inline void platform_do_lowpower(unsigned int cpu,
int *spurious)
:
: "memory", "cc");
- if (pen_release == cpu_logical_map(cpu)) {
+ if (pen_release == phys_cpu) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h
b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 57344b7..cf40b86 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -125,10 +125,14 @@
#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
+#define S5P_ARM_CORE0_STATUS S5P_PMUREG(0x2004)
#define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
-#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
-#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
+#define S5P_ARM_CORE_CONFIGURATION(_nr) \
+ (S5P_ARM_CORE0_CONFIGURATION + ((_nr) * 0x80))
+#define S5P_ARM_CORE_STATUS(_nr) \
+ (S5P_ARM_CORE0_STATUS + ((_nr) * 0x80))
+#define S5P_ARM_CORE_OPTION(_nr) \
+ (S5P_ARM_CORE0_OPTION + ((_nr) * 0x80))
#define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
#define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index d9c6d0a..2cbabc8 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -109,14 +109,15 @@ static int __cpuinit exynos_boot_secondary(unsigned int
cpu, struct task_struct
*/
write_pen_release(phys_cpu);
- if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+ if (!(__raw_readl(S5P_ARM_CORE_STATUS(phys_cpu))
+ & S5P_CORE_LOCAL_PWR_EN)) {
__raw_writel(S5P_CORE_LOCAL_PWR_EN,
- S5P_ARM_CORE1_CONFIGURATION);
+ S5P_ARM_CORE_CONFIGURATION(phys_cpu));
timeout = 10;
/* wait max 10 ms until cpu1 is on */
- while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+ while ((__raw_readl(S5P_ARM_CORE_STATUS(phys_cpu))
& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@@ -125,7 +126,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int
cpu, struct task_struct
}
if (timeout == 0) {
- printk(KERN_ERR "cpu1 power enable failed");
+ printk(KERN_ERR "cpu%u power enable failed", cpu);
spin_unlock(&boot_lock);
return -ETIMEDOUT;
}
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
