From: Joel A Fernandes <agnel.j...@gmail.com>

Some omap_hsmmc's need to start from a particular offset but
otherwise are same and can be reused. Let the DT tell us about
the HW difference, check for the reg-offset property and use
the same in the driver.

Signed-off-by: Joel A Fernandes <agnel.j...@gmail.com>
---
 drivers/mmc/host/omap_hsmmc.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 5af62c6..aae0994 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1717,6 +1717,7 @@ static struct omap_mmc_platform_data 
*of_get_hsmmc_pdata(struct device *dev)
        struct omap_mmc_platform_data *pdata;
        struct device_node *np = dev->of_node;
        u32 bus_width, max_freq;
+       u32 reg_offset;
        int cd_gpio, wp_gpio;
 
        cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
@@ -1755,6 +1756,9 @@ static struct omap_mmc_platform_data 
*of_get_hsmmc_pdata(struct device *dev)
        if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
                pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
 
+       if (!of_property_read_u32(np, "reg-offset", &reg_offset))
+               pdata->reg_offset = reg_offset;
+
        return pdata;
 }
 #else
@@ -1785,7 +1789,8 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
                if (IS_ERR(pdata))
                        return PTR_ERR(pdata);
 
-               if (match->data) {
+               /* Provide reg_offset from match->data unless specified in DT */
+               if (match->data && !pdata->reg_offset) {
                        const u16 *offsetp = match->data;
                        pdata->reg_offset = *offsetp;
                }
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to