This driver supports 16 to 4 bits per work. Set the bits_per_word_mask
to allows the spi core to handle validation.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ryan Mallon <rmal...@gmail.com>
Cc: Mika Westerberg <mika.westerb...@iki.fi>
Cc: Mark Brown <broo...@kernel.org>
Cc: Grant Likely <grant.lik...@linaro.org>
---
drivers/spi/spi-ep93xx.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index c633cd0..93ae7b6 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -272,12 +272,6 @@ static int ep93xx_spi_setup(struct spi_device *spi)
struct ep93xx_spi *espi = spi_master_get_devdata(spi->master);
struct ep93xx_spi_chip *chip;
- if (spi->bits_per_word < 4 || spi->bits_per_word > 16) {
- dev_err(&espi->pdev->dev, "invalid bits per word %d\n",
- spi->bits_per_word);
- return -EINVAL;
- }
-
chip = spi_get_ctldata(spi);
if (!chip) {
dev_dbg(&espi->pdev->dev, "initial setup for %s\n",
@@ -341,10 +335,6 @@ static int ep93xx_spi_transfer(struct spi_device *spi,
struct spi_message *msg)
/* first validate each transfer */
list_for_each_entry(t, &msg->transfers, transfer_list) {
- if (t->bits_per_word) {
- if (t->bits_per_word < 4 || t->bits_per_word > 16)
- return -EINVAL;
- }
if (t->speed_hz && t->speed_hz < espi->min_rate)
return -EINVAL;
}
@@ -1022,6 +1012,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = info->num_chipselect;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->bits_per_word_mask = 0xfff8; /* 16 to 4 bits per word */
platform_set_drvdata(pdev, master);
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
