From: Stefan Seyfried <seife+ker...@b1-systems.com> The recent regression about NetMos 9835 Multi-I/O boards indicates that comment pointing to the parport_serial driver could be helpful.
Signed-off-by: Stefan Seyfried <seife+ker...@b1-systems.com> --- drivers/tty/serial/8250/8250_pci.c | 6 ++++++ drivers/tty/serial/8250/Kconfig | 2 ++ 2 files changed, 8 insertions(+) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index c52948b..c626c4f 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -4797,6 +4797,12 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, + /* + * other NetMos 9835 devices are most likely handled by the + * parport_serial driver, check drivers/parport/parport_serial.c + * before adding them here. + */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index a1ba94d..f3b306e 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -116,6 +116,8 @@ config SERIAL_8250_PCI This builds standard PCI serial support. You may be able to disable this feature if you only need legacy serial support. Saves about 9K. + Note that serial ports on NetMos 9835 Multi-I/O cards are handled + by the parport_serial driver, enabled with CONFIG_PARPORT_SERIAL. config SERIAL_8250_HP300 tristate -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/