Current code sets both irq_ack and irq_mask callbacks to vt8500_irq_mask().
However, vt8500_irq_mask does not clear interrupt enable bit when the interrupt
trigger mode is edge trigger.

This patch moves the code clearing Interrupt Status Register bit to irq_ack().
irq_mask() always clear interrupt enable bit for all interrupt trigger mode.

According to the datasheet, the Interrupt Status Register is written one to
clear(Write 0 has no effect). So we don't need a read-modify-write operation
for clearing a bit in interrupt status register.

Signed-off-by: Axel Lin <axel....@ingics.com>
---
Hi Tony,
I don't have the hardware to test, just found this issue while reading the code.
I'd appreciate if you can review and test this patch serial.

Thanks,
Axel
 drivers/irqchip/irq-vt8500.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-vt8500.c b/drivers/irqchip/irq-vt8500.c
index d970595..eb6d05a 100644
--- a/drivers/irqchip/irq-vt8500.c
+++ b/drivers/irqchip/irq-vt8500.c
@@ -81,25 +81,24 @@ struct vt8500_irq_data {
 static struct vt8500_irq_data intc[VT8500_INTC_MAX];
 static u32 active_cnt = 0;
 
-static void vt8500_irq_mask(struct irq_data *d)
+static void vt8500_irq_ack(struct irq_data *d)
 {
        struct vt8500_irq_data *priv = d->domain->host_data;
        void __iomem *base = priv->base;
        void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
-       u8 edge, dctr;
-       u32 status;
-
-       edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
-       if (edge) {
-               status = readl(stat_reg);
-
-               status |= (1 << (d->hwirq & 0x1f));
-               writel(status, stat_reg);
-       } else {
-               dctr = readb(base + VT8500_ICDC + d->hwirq);
-               dctr &= ~VT8500_INT_ENABLE;
-               writeb(dctr, base + VT8500_ICDC + d->hwirq);
-       }
+
+       writel(1 << (d->hwirq & 0x1f), stat_reg);
+}
+
+static void vt8500_irq_mask(struct irq_data *d)
+{
+       struct vt8500_irq_data *priv = d->domain->host_data;
+       void __iomem *base = priv->base;
+       u8 dctr;
+
+       dctr = readb(base + VT8500_ICDC + d->hwirq);
+       dctr &= ~VT8500_INT_ENABLE;
+       writeb(dctr, base + VT8500_ICDC + d->hwirq);
 }
 
 static void vt8500_irq_unmask(struct irq_data *d)
@@ -145,7 +144,7 @@ static int vt8500_irq_set_type(struct irq_data *d, unsigned 
int flow_type)
 
 static struct irq_chip vt8500_irq_chip = {
        .name = "vt8500",
-       .irq_ack = vt8500_irq_mask,
+       .irq_ack = vt8500_irq_ack,
        .irq_mask = vt8500_irq_mask,
        .irq_unmask = vt8500_irq_unmask,
        .irq_set_type = vt8500_irq_set_type,
-- 
1.8.1.2



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to