With the driver now setup for default 32-bit DMA capabilities, remove the
64-bit DMA related dead code.
Signed-off-by: Myron Stowe <myron.st...@redhat.com>
---
drivers/scsi/megaraid.c | 45 +++++++++------------------------------------
drivers/scsi/megaraid.h | 1 -
2 files changed, 9 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 316924c..58953ab 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -713,12 +713,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int
*busy)
pthru->cdblen = cmd->cmd_len;
memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
- }
+ mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
scb->dma_direction = PCI_DMA_FROMDEVICE;
@@ -750,16 +745,9 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int
*busy)
* A little hack: 2nd bit is zero for all scsi read
* commands and is set for all scsi write commands
*/
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE64:
- MEGA_MBOXCMD_LREAD64 ;
- }
- else {
- mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE:
- MEGA_MBOXCMD_LREAD ;
- }
+ mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
+ MEGA_MBOXCMD_LWRITE:
+ MEGA_MBOXCMD_LREAD ;
/*
* 6-byte READ(0x08) or WRITE(0x0A) cdb
@@ -929,13 +917,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int
*busy)
channel, target);
/* Initialize mailbox */
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
- }
-
+ mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
mbox->m_out.xferaddr = scb->pthru_dma_addr;
}
@@ -1763,7 +1745,7 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32
*buf, u32 *len)
*len = 0;
- if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) {
+ if (scsi_sg_count(cmd) == 1) {
sg = scsi_sglist(cmd);
scb->dma_h_bulkdata = sg_dma_address(sg);
*buf = (u32)scb->dma_h_bulkdata;
@@ -1772,13 +1754,8 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32
*buf, u32 *len)
}
scsi_for_each_sg(cmd, sg, sgcnt, idx) {
- if (adapter->has_64bit_addr) {
- scb->sgl64[idx].address = sg_dma_address(sg);
- *len += scb->sgl64[idx].length = sg_dma_len(sg);
- } else {
- scb->sgl[idx].address = sg_dma_address(sg);
- *len += scb->sgl[idx].length = sg_dma_len(sg);
- }
+ scb->sgl[idx].address = sg_dma_address(sg);
+ *len += scb->sgl[idx].length = sg_dma_len(sg);
}
/* Reset pointer and length fields */
@@ -2076,10 +2053,7 @@ proc_show_config(struct seq_file *m, void *v)
if(adapter->flag & BOARD_64BIT)
seq_puts(m, "Controller capable of 64-bit memory addressing\n");
- if( adapter->has_64bit_addr )
- seq_puts(m, "Controller using 64-bit memory addressing\n");
- else
- seq_puts(m, "Controller is not using 64-bit memory
addressing\n");
+ seq_puts(m, "Controller is not using 64-bit memory addressing\n");
seq_printf(m, "Base = %08lx, Irq = %d, ",
adapter->base, adapter->host->irq);
@@ -4471,7 +4445,6 @@ megaraid_probe_one(struct pci_dev *pdev, const struct
pci_device_id *id)
/* Set the Mode of addressing to 32 bit */
pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- adapter->has_64bit_addr = 0;
mutex_init(&adapter->int_mtx);
init_completion(&adapter->int_waitq);
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 4d0ce4e..17e449b 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -827,7 +827,6 @@ typedef struct {
#endif
- int has_64bit_addr; /* are we using 64-bit addressing */
int support_ext_cdb;
int boot_ldrv_enabled;
int boot_ldrv;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
