On Wed, Jul 10, 2013 at 07:25:39PM +0800, Wei Ni wrote:
> Using enums for the indexes and nrs of temp8 and temp11.
> This make the code much more readable.
> 
> Signed-off-by: Wei Ni <[email protected]>

I don't really have a strong opinion on this one. Nice, but is it really worth 
it ? 
Jean, any comments ?

Guenter

> ---
>  drivers/hwmon/lm90.c |  179 
> ++++++++++++++++++++++++++++++++------------------
>  1 file changed, 114 insertions(+), 65 deletions(-)
> 
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> index 88ff362..14e0b5b 100644
> --- a/drivers/hwmon/lm90.c
> +++ b/drivers/hwmon/lm90.c
> @@ -310,6 +310,59 @@ static const struct lm90_params lm90_params[] = {
>  };
>  
>  /*
> + * TEMP8 register index
> + */
> +enum lm90_temp8_reg_index {
> +     TEMP8_LOCAL_LOW = 0,    /* 0: local low limit */
> +     TEMP8_LOCAL_HIGH,       /* 1: local high limit */
> +     TEMP8_LOCAL_CRIT,       /* 2: local critical limit */
> +     TEMP8_REMOTE_CRIT,      /* 3: remote critical limit */
> +     TEMP8_LOCAL_EMERG,      /* 4: local emergency limit
> +                              * (max6659 and max6695/96)
> +                              */
> +     TEMP8_REMOTE_EMERG,     /* 5: remote emergency limit
> +                              * (max6659 and max6695/96)
> +                              */
> +     TEMP8_REMOTE2_CRIT,     /* 6: remote 2 critical limit
> +                              * (max6695/96 only)
> +                              */
> +     TEMP8_REMOTE2_EMERG,    /* 7: remote 2 emergency limit
> +                              * (max6695/96 only)
> +                              */
> +     TEMP8_REG_NUM
> +};
> +
> +/*
> + * TEMP11 register index
> + */
> +enum lm90_temp11_reg_index {
> +     TEMP11_REMOTE_TEMP = 0, /* 0: remote input */
> +     TEMP11_REMOTE_LOW,      /* 1: remote low limit */
> +     TEMP11_REMOTE_HIGH,     /* 2: remote high limit */
> +     TEMP11_REMOTE_OFFSET,   /* 3: remote offset
> +                              * (except max6646, max6657/58/59,
> +                              *  and max6695/96)
> +                              */
> +     TEMP11_LOCAL_TEMP,      /* 4: local input */
> +     TEMP11_REMOTE2_TEMP,    /* 5: remote 2 input (max6695/96 only) */
> +     TEMP11_REMOTE2_LOW,     /* 6: remote 2 low limit (max6695/96 only) */
> +     TEMP11_REMOTE2_HIGH,    /* 7: remote 2 high limit (max6695/96 only) */
> +     TEMP11_REG_NUM
> +};
> +
> +/*
> + * TEMP11 register NR
> + */
> +enum lm90_temp11_reg_nr {
> +     NR_CHAN_0_REMOTE_LOW = 0,       /* 0: channel 0, remote low limit */
> +     NR_CHAN_0_REMOTE_HIGH,          /* 1: channel 0, remote high limit */
> +     NR_CHAN_0_REMOTE_OFFSET,        /* 2: channel 0, remote offset */
> +     NR_CHAN_1_REMOTE_LOW,           /* 3: channel 1, remote low limit */
> +     NR_CHAN_1_REMOTE_HIGH,          /* 4: channel 1, remote high limit */
> +     NR_NUM                          /* number of the NRs for temp11 */
> +};
> +
> +/*
>   * Client data (each client gets its own)
>   */
>  
> @@ -331,25 +384,8 @@ struct lm90_data {
>       u8 reg_local_ext;       /* local extension register offset */
>  
>       /* registers values */
> -     s8 temp8[8];    /* 0: local low limit
> -                      * 1: local high limit
> -                      * 2: local critical limit
> -                      * 3: remote critical limit
> -                      * 4: local emergency limit (max6659 and max6695/96)
> -                      * 5: remote emergency limit (max6659 and max6695/96)
> -                      * 6: remote 2 critical limit (max6695/96 only)
> -                      * 7: remote 2 emergency limit (max6695/96 only)
> -                      */
> -     s16 temp11[8];  /* 0: remote input
> -                      * 1: remote low limit
> -                      * 2: remote high limit
> -                      * 3: remote offset (except max6646, max6657/58/59,
> -                      *                   and max6695/96)
> -                      * 4: local input
> -                      * 5: remote 2 input (max6695/96 only)
> -                      * 6: remote 2 low limit (max6695/96 only)
> -                      * 7: remote 2 high limit (max6695/96 only)
> -                      */
> +     s8 temp8[TEMP8_REG_NUM];
> +     s16 temp11[TEMP11_REG_NUM];
>       u8 temp_hyst;
>       u16 alarms; /* bitvector (upper 8 bits for max6695/96) */
>  };
> @@ -491,37 +527,42 @@ static struct lm90_data *lm90_update_device(struct 
> device *dev)
>               u8 alarms;
>  
>               dev_dbg(&client->dev, "Updating lm90 data.\n");
> -             lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]);
> -             lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]);
> -             lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]);
> -             lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]);
> +             lm90_read_reg(client, LM90_REG_R_LOCAL_LOW,
> +                             &data->temp8[TEMP8_LOCAL_LOW]);
> +             lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH,
> +                             &data->temp8[TEMP8_LOCAL_HIGH]);
> +             lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT,
> +                             &data->temp8[TEMP8_LOCAL_CRIT]);
> +             lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
> +                             &data->temp8[TEMP8_REMOTE_CRIT]);
>               lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
>  
>               if (data->reg_local_ext) {
>                       lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
>                                   data->reg_local_ext,
> -                                 &data->temp11[4]);
> +                                 &data->temp11[TEMP11_LOCAL_TEMP]);
>               } else {
>                       if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
>                                         &h) == 0)
> -                             data->temp11[4] = h << 8;
> +                             data->temp11[TEMP11_LOCAL_TEMP] = h << 8;
>               }
>               lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
> -                         LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]);
> +                     LM90_REG_R_REMOTE_TEMPL,
> +                     &data->temp11[TEMP11_REMOTE_TEMP]);
>  
>               if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) {
> -                     data->temp11[1] = h << 8;
> +                     data->temp11[TEMP11_REMOTE_LOW] = h << 8;
>                       if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
>                        && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL,
>                                         &l) == 0)
> -                             data->temp11[1] |= l;
> +                             data->temp11[TEMP11_REMOTE_LOW] |= l;
>               }
>               if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) {
> -                     data->temp11[2] = h << 8;
> +                     data->temp11[TEMP11_REMOTE_HIGH] = h << 8;
>                       if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
>                        && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL,
>                                         &l) == 0)
> -                             data->temp11[2] |= l;
> +                             data->temp11[TEMP11_REMOTE_HIGH] |= l;
>               }
>  
>               if (data->flags & LM90_HAVE_OFFSET) {
> @@ -529,13 +570,14 @@ static struct lm90_data *lm90_update_device(struct 
> device *dev)
>                                         &h) == 0
>                        && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
>                                         &l) == 0)
> -                             data->temp11[3] = (h << 8) | l;
> +                             data->temp11[TEMP11_REMOTE_OFFSET] =
> +                                                             (h << 8) | l;
>               }
>               if (data->flags & LM90_HAVE_EMERGENCY) {
>                       lm90_read_reg(client, MAX6659_REG_R_LOCAL_EMERG,
> -                                   &data->temp8[4]);
> +                                   &data->temp8[TEMP8_LOCAL_EMERG]);
>                       lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
> -                                   &data->temp8[5]);
> +                                   &data->temp8[TEMP8_REMOTE_EMERG]);
>               }
>               lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
>               data->alarms = alarms;  /* save as 16 bit value */
> @@ -543,15 +585,16 @@ static struct lm90_data *lm90_update_device(struct 
> device *dev)
>               if (data->kind == max6696) {
>                       lm90_select_remote_channel(client, data, 1);
>                       lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
> -                                   &data->temp8[6]);
> +                                   &data->temp8[TEMP8_REMOTE2_CRIT]);
>                       lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
> -                                   &data->temp8[7]);
> +                                   &data->temp8[TEMP8_REMOTE2_EMERG]);
>                       lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
> -                                 LM90_REG_R_REMOTE_TEMPL, &data->temp11[5]);
> +                                     LM90_REG_R_REMOTE_TEMPL,
> +                                     &data->temp11[TEMP11_REMOTE2_TEMP]);
>                       if (!lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h))
> -                             data->temp11[6] = h << 8;
> +                             data->temp11[TEMP11_REMOTE2_LOW] = h << 8;
>                       if (!lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h))
> -                             data->temp11[7] = h << 8;
> +                             data->temp11[TEMP11_REMOTE2_HIGH] = h << 8;
>                       lm90_select_remote_channel(client, data, 0);
>  
>                       if (!lm90_read_reg(client, MAX6696_REG_R_STATUS2,
> @@ -748,7 +791,7 @@ static ssize_t show_temp8(struct device *dev, struct 
> device_attribute *devattr,
>  
>  static void write_temp8(struct device *dev, int index, long val)
>  {
> -     static const u8 reg[8] = {
> +     static const u8 reg[TEMP8_REG_NUM] = {
>               LM90_REG_W_LOCAL_LOW,
>               LM90_REG_W_LOCAL_HIGH,
>               LM90_REG_W_LOCAL_CRIT,
> @@ -834,7 +877,7 @@ static void write_temp11(struct device *dev, int nr, int 
> index, long val)
>               u8 high;
>               u8 low;
>               int channel;
> -     } reg[5] = {
> +     } reg[NR_NUM] = {
>               { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 0 },
>               { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 0 },
>               { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL, 0 },
> @@ -925,11 +968,12 @@ static ssize_t set_temphyst(struct device *dev, struct 
> device_attribute *dummy,
>  
>       mutex_lock(&data->update_lock);
>       if (data->kind == adt7461)
> -             temp = temp_from_u8_adt7461(data, data->temp8[2]);
> +             temp = temp_from_u8_adt7461(data,
> +                                     data->temp8[TEMP8_LOCAL_CRIT]);
>       else if (data->kind == max6646)
> -             temp = temp_from_u8(data->temp8[2]);
> +             temp = temp_from_u8(data->temp8[TEMP8_LOCAL_CRIT]);
>       else
> -             temp = temp_from_s8(data->temp8[2]);
> +             temp = temp_from_s8(data->temp8[TEMP8_LOCAL_CRIT]);
>  
>       data->temp_hyst = hyst_to_reg(temp - val);
>       i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
> @@ -983,25 +1027,28 @@ static ssize_t set_update_interval(struct device *dev,
>       return count;
>  }
>  
> -static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL, 0, 4);
> -static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL, 0, 0);
> +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp11, NULL,
> +     NR_CHAN_0_REMOTE_LOW, TEMP11_LOCAL_TEMP);
> +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp11, NULL,
> +     NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE_TEMP);
>  static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 0);
> +     set_temp8, TEMP8_LOCAL_LOW);
>  static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
> -     set_temp11, 0, 1);
> +     set_temp11, NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE_LOW);
>  static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 1);
> +     set_temp8, TEMP8_LOCAL_HIGH);
>  static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
> -     set_temp11, 1, 2);
> +     set_temp11, NR_CHAN_0_REMOTE_HIGH, TEMP11_REMOTE_HIGH);
>  static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 2);
> +     set_temp8, TEMP8_LOCAL_CRIT);
>  static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 3);
> +     set_temp8, TEMP8_REMOTE_CRIT);
>  static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
> -     set_temphyst, 2);
> -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 3);
> +     set_temphyst, TEMP8_LOCAL_CRIT);
> +static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL,
> +     TEMP8_REMOTE_CRIT);
>  static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp11,
> -     set_temp11, 2, 3);
> +     set_temp11, NR_CHAN_0_REMOTE_OFFSET, TEMP11_REMOTE_OFFSET);
>  
>  /* Individual alarm files */
>  static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
> @@ -1049,13 +1096,13 @@ static const struct attribute_group lm90_group = {
>   * Additional attributes for devices with emergency sensors
>   */
>  static SENSOR_DEVICE_ATTR(temp1_emergency, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 4);
> +     set_temp8, TEMP8_LOCAL_EMERG);
>  static SENSOR_DEVICE_ATTR(temp2_emergency, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 5);
> +     set_temp8, TEMP8_REMOTE_EMERG);
>  static SENSOR_DEVICE_ATTR(temp1_emergency_hyst, S_IRUGO, show_temphyst,
> -                       NULL, 4);
> +                       NULL, TEMP8_LOCAL_EMERG);
>  static SENSOR_DEVICE_ATTR(temp2_emergency_hyst, S_IRUGO, show_temphyst,
> -                       NULL, 5);
> +                       NULL, TEMP8_REMOTE_EMERG);
>  
>  static struct attribute *lm90_emergency_attributes[] = {
>       &sensor_dev_attr_temp1_emergency.dev_attr.attr,
> @@ -1085,18 +1132,20 @@ static const struct attribute_group 
> lm90_emergency_alarm_group = {
>  /*
>   * Additional attributes for devices with 3 temperature sensors
>   */
> -static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL, 0, 5);
> +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL,
> +     NR_CHAN_0_REMOTE_LOW, TEMP11_REMOTE2_TEMP);
>  static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp11,
> -     set_temp11, 3, 6);
> +     set_temp11, NR_CHAN_1_REMOTE_LOW, TEMP11_REMOTE2_LOW);
>  static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp11,
> -     set_temp11, 4, 7);
> +     set_temp11, NR_CHAN_1_REMOTE_HIGH, TEMP11_REMOTE2_HIGH);
>  static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 6);
> -static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL, 6);
> +     set_temp8, TEMP8_REMOTE2_CRIT);
> +static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL,
> +     TEMP8_REMOTE2_CRIT);
>  static SENSOR_DEVICE_ATTR(temp3_emergency, S_IWUSR | S_IRUGO, show_temp8,
> -     set_temp8, 7);
> +     set_temp8, TEMP8_REMOTE2_EMERG);
>  static SENSOR_DEVICE_ATTR(temp3_emergency_hyst, S_IRUGO, show_temphyst,
> -                       NULL, 7);
> +                       NULL, TEMP8_REMOTE2_EMERG);
>  
>  static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
>  static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 10);
> -- 
> 1.7.9.5
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to