Hi Maxime, El 23/07/13 19:28, Maxime Ripard escribió: > The A10s has only a subset of the A10 gates. Now that the clock driver > has support for this gates set, switch to it in the DTSI. > > Signed-off-by: Maxime Ripard <[email protected]>
As I mentioned on the other patch, my board boots, so Tested-by: Emilio López <[email protected]> > --- > arch/arm/boot/dts/sun5i-a10s.dtsi | 36 ++++++++++++++---------------------- > 1 file changed, 14 insertions(+), 22 deletions(-) > > diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi > b/arch/arm/boot/dts/sun5i-a10s.dtsi > index 0f0881a..b8fc1c2 100644 > --- a/arch/arm/boot/dts/sun5i-a10s.dtsi > +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi > @@ -95,20 +95,16 @@ > > ahb_gates: ahb_gates@01c20060 { > #clock-cells = <1>; > - compatible = "allwinner,sun4i-ahb-gates-clk"; > + compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; > reg = <0x01c20060 0x8>; > clocks = <&ahb>; > - clock-output-names = "ahb_usb0", "ahb_ehci0", > - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", > - "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", > - "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", > - "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", > - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", > - "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", > - "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", > - "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", > - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", > - "ahb_de_fe1", "ahb_mp", "ahb_mali400"; > + clock-output-names = "ahb_usbotg", "ahb_ehci", > "ahb_ohci", > + "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", > + "ahb_mmc1", "ahb_mmc2", I noticed the vendor code also has "ahb_ms" here, it might be worth keeping it in mind. > "ahb_nand", "ahb_sdram", > + "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", > + "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve", > + "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi", > + "ahb_de_be", "ahb_de_fe", "ahb_iep", > "ahb_mali400"; > }; > > apb0: apb0@01c20054 { > @@ -120,12 +116,11 @@ > > apb0_gates: apb0_gates@01c20068 { > #clock-cells = <1>; > - compatible = "allwinner,sun4i-apb0-gates-clk"; > + compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; > reg = <0x01c20068 0x4>; > clocks = <&apb0>; > - clock-output-names = "apb0_codec", "apb0_spdif", > - "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", > - "apb0_ir1", "apb0_keypad"; > + clock-output-names = "apb0_codec", "apb0_iis", > "apb0_pio", > + "apb0_ir", "apb0_keypad"; > }; > > /* dummy is pll62 */ > @@ -145,15 +140,12 @@ > > apb1_gates: apb1_gates@01c2006c { > #clock-cells = <1>; > - compatible = "allwinner,sun4i-apb1-gates-clk"; > + compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; > reg = <0x01c2006c 0x4>; > clocks = <&apb1>; > clock-output-names = "apb1_i2c0", "apb1_i2c1", > - "apb1_i2c2", "apb1_can", "apb1_scr", > - "apb1_ps20", "apb1_ps21", "apb1_uart0", > - "apb1_uart1", "apb1_uart2", "apb1_uart3", > - "apb1_uart4", "apb1_uart5", "apb1_uart6", > - "apb1_uart7"; > + "apb1_i2c2", "apb1_uart0", "apb1_uart1", > + "apb1_uart2", "apb1_uart3"; > }; > }; > > An update to the documentation mentioning these compatibles[1] and gates[2] would be great :) [1] Documentation/devicetree/bindings/clock/sunxi.txt [2] Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt Thanks for working on this! Emilio -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
