John Chris Wren writes:
> coupling to the CPU that is about as bad as it can get. You've got an epoxy
> housing of an inconsistent shape in contact with ceramic. The actual
> contact point is miniscule. There's no thermal paste, and often, I've seen
> the sensors not quite raised high enough to contact the chip (you should be
> able to rack a business card across the empty socket and feel a slight
> "bump" as you touch the sensor. If not, you need to bend it up slightly, to
> give better physical contact to the CPU).
>
> But in spite of all this, you're not really measure the critical
> temperature, which is junction tempature. Yes, case tempature has *some*
There are processors with temperature measurement built right
into the silicon.
> For the record, in the course of a normal day, I see my temperatures
> fluctuate from 48C with the house A/C set to 73, to 56C when I open the
> doors, and let it get up to 76 in the house. That's 8C (14.4F) over a 3F
> change in ambient.
This makes sense. Heat increases resistance, which generates heat.
At some point, a tiny increase will cause thermal run-away.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
