3.8.13.7 -stable review patch. If anyone has any objections, please let me know.
------------------ From: Oleksij Rempel <[email protected]> commit dc2a87f519a4d8cb376ab54f22b6b98a943b51ce upstream. Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1 Tested-by: Bo Shi <[email protected]> Signed-off-by: Oleksij Rempel <[email protected]> Signed-off-by: John W. Linville <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> --- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 0663653..351123a 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -846,6 +846,7 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv, if (error != 0) goto err_rx; + ath9k_hw_disable(priv->ah); #ifdef CONFIG_MAC80211_LEDS /* must be initialized before ieee80211_register_hw */ priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw, -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
