It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <[email protected]> --- arch/arm/mach-ux500/board-mop500-stuib.c | 62 -------------------------------- 1 file changed, 62 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c index 7e1f294..b57996b 100644 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ b/arch/arm/mach-ux500/board-mop500-stuib.c @@ -6,73 +6,14 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/mfd/stmpe.h> #include <linux/input/bu21013.h> #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/i2c.h> -#include <linux/input/matrix_keypad.h> #include <asm/mach-types.h> #include "board-mop500.h" -/* STMPE/SKE keypad use this key layout */ -static const unsigned int mop500_keymap[] = { - KEY(2, 5, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(3, 5, KEY_VOLUMEDOWN), - KEY(1, 3, KEY_3), - KEY(5, 2, KEY_RIGHT), - KEY(5, 0, KEY_9), - - KEY(0, 5, KEY_MENU), - KEY(7, 6, KEY_ENTER), - KEY(4, 5, KEY_0), - KEY(6, 7, KEY_2), - KEY(3, 4, KEY_UP), - KEY(3, 3, KEY_DOWN), - - KEY(6, 4, KEY_SEND), - KEY(6, 2, KEY_BACK), - KEY(4, 2, KEY_VOLUMEUP), - KEY(5, 5, KEY_1), - KEY(4, 3, KEY_LEFT), - KEY(3, 2, KEY_7), -}; - -static const struct matrix_keymap_data mop500_keymap_data = { - .keymap = mop500_keymap, - .keymap_size = ARRAY_SIZE(mop500_keymap), -}; -/* - * STMPE1601 - */ -static struct stmpe_keypad_platform_data stmpe1601_keypad_data = { - .debounce_ms = 64, - .scan_count = 8, - .no_autorepeat = true, - .keymap_data = &mop500_keymap_data, -}; - -static struct stmpe_platform_data stmpe1601_data = { - .id = 1, - .blocks = STMPE_BLOCK_KEYPAD, - .irq_trigger = IRQF_TRIGGER_FALLING, - .irq_base = MOP500_STMPE1601_IRQ(0), - .keypad = &stmpe1601_keypad_data, - .autosleep = true, - .autosleep_timeout = 1024, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = { - { - I2C_BOARD_INFO("stmpe1601", 0x40), - .irq = NOMADIK_GPIO_TO_IRQ(218), - .platform_data = &stmpe1601_data, - .flags = I2C_CLIENT_WAKE, - }, -}; - /* * BU21013 ROHM touchscreen interface on the STUIBs */ @@ -112,9 +53,6 @@ void __init mop500_stuib_init(void) else tsc_plat_device.cs_pin = GPIO_BU21013_CS; - mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib, - ARRAY_SIZE(mop500_i2c0_devices_stuib)); - mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib, ARRAY_SIZE(u8500_i2c3_devices_stuib)); } -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
