The MTU0 is required for full booting of the system. The driver has been previously DT:ed and is in use on the Nomadik platform, but we also need to enable it on ux500 based systems.
Signed-off-by: Lee Jones <[email protected]> --- arch/arm/boot/dts/dbx5x0.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 5c3ff94..0d2d5d0 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -43,6 +43,7 @@ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; + clocks { compatible = "stericsson,u8500-clks"; @@ -67,6 +68,16 @@ }; }; + mtu@a03c6000 { + /* Nomadik System Timer */ + compatible = "st,nomadik-mtu"; + reg = <0xa03c6000 0x1000>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>; + clock-names = "timclk", "apb_pclk"; + }; + timer@a0410600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xa0410600 0x20>; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
