On 09/18/2013 07:53 PM, Sebastian Hesselbarth wrote:
MTU timer initialization is stuffed into .init_time callback, while
cpu8815_timer_init_of again maps addresses from the same device node.
Therefore, this patch moves mtu setup from to clocksource init.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Cc: Olof Johansson <o...@lixom.net>
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Alessandro Rubini <rub...@unipv.it>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: STEricsson <stericsson_nomadik_li...@list.st.com>
Cc: Russell King <li...@arm.linux.org.uk>
Cc: Daniel Lezcano <daniel.lezc...@linaro.org>
Cc: Thomas Gleixner <t...@linutronix.de>
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
  arch/arm/mach-nomadik/cpu-8815.c  |   26 --------------------------
  drivers/clocksource/nomadik-mtu.c |   11 +++++++++++
  2 files changed, 11 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 13e0df9..0fcb149 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -113,36 +113,10 @@ static void cpu8815_restart(enum reboot_mode mode, const 
char *cmd)
        writel(1, srcbase + 0x18);
  }

-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK       0x00007fff
-#define SRC_CR_INIT_VAL                0x2aaa8000
-
  static void __init cpu8815_timer_init_of(void)
  {
-       struct device_node *mtu;
-       void __iomem *base;
-       int irq;
-       u32 src_cr;
-
        /* We need this to be up now */
        nomadik_clk_init();
-
-       mtu = of_find_node_by_path("/mtu@101e2000");
-       if (!mtu)
-               return;
-       base = of_iomap(mtu, 0);
-       if (WARN_ON(!base))
-               return;
-       irq = irq_of_parse_and_map(mtu, 0);
-
-       pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
-
-       /* Configure timer sources in "system reset controller" ctrl reg */
-       src_cr = readl(base);
-       src_cr &= SRC_CR_INIT_MASK;
-       src_cr |= SRC_CR_INIT_VAL;
-       writel(src_cr, base);
-
        clocksource_of_init();
  }

Linus,

looking at the fix you posted at [1], can I assume that the above it
redundant and can be removed?

[1] http://marc.info/?l=linux-arm-kernel&m=137910161418706&w=2

diff --git a/drivers/clocksource/nomadik-mtu.c 
b/drivers/clocksource/nomadik-mtu.c
index 1b74bea..b9f97ba 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -257,12 +257,17 @@ void __init nmdk_timer_init(void __iomem *base, int irq)
        __nmdk_timer_init(base, irq, pclk0, clk0);
  }

+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK       0x00007fff
+#define SRC_CR_INIT_VAL                0x2aaa8000
+
  static void __init nmdk_timer_of_init(struct device_node *node)
  {
        struct clk *pclk;
        struct clk *clk;
        void __iomem *base;
        int irq;
+       u32 src_cr;

        base = of_iomap(node, 0);
        if (!base)
@@ -280,6 +285,12 @@ static void __init nmdk_timer_of_init(struct device_node 
*node)
        if (irq <= 0)
                panic("Can't parse IRQ");

+       /* Configure timer sources in "system reset controller" ctrl reg */
+       src_cr = readl(base);
+       src_cr &= SRC_CR_INIT_MASK;
+       src_cr |= SRC_CR_INIT_VAL;
+       writel(src_cr, base);
+
        __nmdk_timer_init(base, irq, pclk, clk);
  }
  CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to