Hi Tony, here is new version (v2) of patch which adding max_current values to rx51 board data. According to joerg safe value for max_current is 100 (10 mA).
RX-51: Add missing max_current to rx51_lp5523_led_config File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs attribute if value is higher than max_current specified in board file. By default global C variables are zero, so changing always failed. This patch adding missing max_current and setting it to max safe value 100 (10 mA). Signed-off-by: Pali Rohár <[email protected]> --- arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c3270c0..f6fe388 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = { .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:b", .chan_nr = 4, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:g", .chan_nr = 5, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:r", .chan_nr = 6, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, + .max_current = 100, } }; -- 1.7.10.4 -- Pali Rohár [email protected]
signature.asc
Description: This is a digitally signed message part.
