Hi Tony,
On 09/24/2013 11:53 AM, Roger Quadros wrote:
> The platform data bits can be inferred from the other members of
> struct usbhs_phy_data. So get rid of the platform_data member.
>
> Build the platform data for the PHY device in usbhs_init_phys() instead.
>
> Signed-off-by: Roger Quadros <rog...@ti.com>
Could you please Ack this if OK?
cheers,
-roger
> ---
> arch/arm/mach-omap2/board-omap3beagle.c | 6 ------
> arch/arm/mach-omap2/usb-host.c | 11 ++++++++++-
> arch/arm/mach-omap2/usb.h | 1 -
> 3 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
> b/arch/arm/mach-omap2/board-omap3beagle.c
> index f269184..8b9cd06 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -289,18 +289,12 @@ static struct regulator_consumer_supply
> beagle_vsim_supply[] = {
>
> static struct gpio_led gpio_leds[];
>
> -/* PHY's VCC regulator might be added later, so flag that we need it */
> -static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = {
> - .needs_vcc = true,
> -};
> -
> static struct usbhs_phy_data phy_data[] = {
> {
> .port = 2,
> .reset_gpio = 147,
> .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
> .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
> - .platform_data = &hsusb2_phy_data,
> },
> };
>
> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
> index e83a6a4..78ac1c2 100644
> --- a/arch/arm/mach-omap2/usb-host.c
> +++ b/arch/arm/mach-omap2/usb-host.c
> @@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int
> num_phys)
> struct platform_device *pdev;
> char *phy_id;
> struct platform_device_info pdevinfo;
> + struct usb_phy_gen_xceiv_platform_data nop_pdata;
>
> for (i = 0; i < num_phys; i++) {
>
> @@ -455,11 +456,19 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int
> num_phys)
> return -ENOMEM;
> }
>
> + /* set platform data */
> + memset(&nop_pdata, 0, sizeof(nop_pdata));
> + if (gpio_is_valid(phy->vcc_gpio))
> + nop_pdata.needs_vcc = true;
> + if (gpio_is_valid(phy->reset_gpio))
> + nop_pdata.needs_reset = true;
> + nop_pdata.type = USB_PHY_TYPE_USB2;
> +
> /* create a NOP PHY device */
> memset(&pdevinfo, 0, sizeof(pdevinfo));
> pdevinfo.name = nop_name;
> pdevinfo.id = phy->port;
> - pdevinfo.data = phy->platform_data;
> + pdevinfo.data = &nop_pdata;
> pdevinfo.size_data =
> sizeof(struct usb_phy_gen_xceiv_platform_data);
> scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
> diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
> index e7261eb..4ba2ae7 100644
> --- a/arch/arm/mach-omap2/usb.h
> +++ b/arch/arm/mach-omap2/usb.h
> @@ -58,7 +58,6 @@ struct usbhs_phy_data {
> int reset_gpio;
> int vcc_gpio;
> bool vcc_polarity; /* 1 active high, 0 active low */
> - void *platform_data;
> };
>
> extern void usb_musb_init(struct omap_musb_board_data *board_data);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
