On Wed, Sep 18, 2013 at 09:19:54PM +0200, Heiko Stübner wrote:
> This adds a new driver to support the s3c24xx dma using the dmaengine
> and makes the old one in mach-s3c24xx obsolete in the long run.
> 
> Conceptually the s3c24xx-dma feels like a distant relative of the pl08x
> with numerous virtual channels being mapped to a lot less physical ones.
> The driver therefore borrows a lot from the amba-pl08x driver in this
> regard. Functionality-wise the driver gains a memcpy ability in addition
> to the slave_sg one.
> 
> The driver supports both the method for requesting the peripheral used
> by SoCs before the S3C2443 and the different method for S3C2443 and later.
> 
> On earlier SoCs the hardware channels usable for specific peripherals is
> constrainted while on later SoCs all channels can be used for any peripheral.
> 
> Tested on a s3c2416-based board, memcpy using the dmatest module and
> slave_sg partially using the spi-s3c64xx driver.
> 
> Signed-off-by: Heiko Stuebner <[email protected]>
> Acked-by: Linus Walleij <[email protected]>
Acked-by: Vinod Koul <[email protected]>

--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to