Some legacy devices support ony I2C standard mode at 100kHz. This patch allows to select the standard mode through the DTS with the use of the existing clock-frequency parameter.
When clock-frequency parameter is not set, the fast mode is selected. Only when the parameter is set at 100000, the standard mode is selected. Signed-off-by: Romain Baeriswyl <[email protected]> Reviewed-by: Christian Ruppert <[email protected]> --- .../devicetree/bindings/i2c/i2c-designware.txt | 1 + drivers/i2c/busses/i2c-designware-platdrv.c | 17 +++++++++++++++-- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt index 5199b0c..16d0bef 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt @@ -9,6 +9,7 @@ Required properties : Recommended properties : - clock-frequency : desired I2C bus clock frequency in Hz. + Only standard mode at 100kHz and fast mode at 400kHz are supported. Optional properties : - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds. diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0d6fe47..5f06848 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -87,6 +87,7 @@ static int dw_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct resource *mem; int irq, r; + u32 clk_freq; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -122,6 +123,9 @@ static int dw_i2c_probe(struct platform_device *pdev) return PTR_ERR(dev->clk); clk_prepare_enable(dev->clk); + /* fast mode by default */ + clk_freq = 400000; + if (pdev->dev.of_node) { u32 ht = 0; u32 ic_clk = dev->get_clk_rate_khz(dev); @@ -136,6 +140,11 @@ static int dw_i2c_probe(struct platform_device *pdev) of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns", &dev->scl_falling_time); + + of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &clk_freq); + if (clk_freq != 100000 && clk_freq != 400000) + return -EINVAL; } dev->functionality = @@ -145,8 +154,12 @@ static int dw_i2c_probe(struct platform_device *pdev) I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK; - dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | - DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; + if (clk_freq == 100000) + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD; + else + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; /* Try first if we can configure the device from ACPI */ r = dw_i2c_acpi_configure(pdev); -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
