On 11:55 Wed 23 Oct , Johan Hovold wrote:
> Use devm_gpio_request_one rather than requesting and setting direction
> in two calls.
this is the same I do not see any advantage
and as I said for ather backligth It's wrong to enable or disable it at probe
as the bootloader might have already enable it for splash screen
Best Regards,
J.
>
> Acked-by: Jingoo Han <jg1....@samsung.com>:w
> Signed-off-by: Johan Hovold <jhov...@gmail.com>
> ---
> drivers/video/backlight/atmel-pwm-bl.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/video/backlight/atmel-pwm-bl.c
> b/drivers/video/backlight/atmel-pwm-bl.c
> index 1277e0c..5ea2517 100644
> --- a/drivers/video/backlight/atmel-pwm-bl.c
> +++ b/drivers/video/backlight/atmel-pwm-bl.c
> @@ -124,6 +124,7 @@ static int atmel_pwm_bl_probe(struct platform_device
> *pdev)
> const struct atmel_pwm_bl_platform_data *pdata;
> struct backlight_device *bldev;
> struct atmel_pwm_bl *pwmbl;
> + int flags;
> int retval;
>
> pdata = dev_get_platdata(&pdev->dev);
> @@ -149,14 +150,14 @@ static int atmel_pwm_bl_probe(struct platform_device
> *pdev)
> return retval;
>
> if (gpio_is_valid(pwmbl->gpio_on)) {
> - retval = devm_gpio_request(&pdev->dev, pwmbl->gpio_on,
> - "gpio_atmel_pwm_bl");
> - if (retval)
> - goto err_free_pwm;
> -
> /* Turn display off by default. */
> - retval = gpio_direction_output(pwmbl->gpio_on,
> - 0 ^ pdata->on_active_low);
> + if (pdata->on_active_low)
> + flags = GPIOF_OUT_INIT_HIGH;
> + else
> + flags = GPIOF_OUT_INIT_LOW;
> +
> + retval = devm_gpio_request_one(&pdev->dev, pwmbl->gpio_on,
> + flags, "gpio_atmel_pwm_bl");
> if (retval)
> goto err_free_pwm;
> }
> --
> 1.8.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
